Alpacket
I know the envy your speaking of when looking at a TIG setups and the beautiful welds they can produce.
However, MIG is probably what you want to stay with. The reason I'm saying this, if your still having problems with burn through and stop/starts, etc..it will only be worse with TIG. Why? Because essentially the MIG is doing all work, when in TIG you do all the work.
But if you got a good line on that TIG, it might be a good deal, would you let us know what machine your looking at? Some of the smaller TIGs like Lincolns 175 might not be enough machine or too basic for your needs. But they can be a great starter machine too.
Also, perhaps you might consider a newer MIG unit. They weld very differently and have different arc characteristics which we can go over if you want. Perhaps the issues your having are do to an old machine?
Are you using shielding gas with your MIG, either C25 or CO2? Or are you using self shielded wire? That also makes a big difference.
I personally don't care for self shielded wire, but it works in a pinch.
There is also duel shield wire, perhaps some of the best looking welds I have ever scene. AKA - Flux Core Arc Welding.
http://www.esabna.com/us/en/products/index.cfm?fuseaction=home.product&productCode=237
Want to make your MIG "look
like TIG?
Check out this thread.
http://weldingweb.com/showthread.php?30845-Mig-like-Tig
67 Half Cab wrote:
"While allowing more control of the welding arc, GTAW (TIG) puts a higher heat input on the base metal than MIG making it much easier to warp sheet metal. For body panel replacement I would stick with the wire feeder."
I have to disagree with the first part he stated. TIG doesn't input higher heat unless the operator allows it (either intentional or unintentional). For my initial training I had 1200+ hours of TIG welding and we used to weld up "pop" cans all the time, and I consider myself average in TIG. I couldn't weld that with a off the shelf MIG unit.
I do agree with 67 Half Cab that for most applications a wire feed welder is better for body work.
Without really knowing you and your budget and future ambitions, its hard to know what advise to really give, so I hope these general examples work right now.
J.E.