• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Bilstein Shocks question

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
Newbie here. I have a 66 with a 3" lift and a 351W EFI and very old and worthless shocks. The front has 2 on each corner and the rear is singles.
When I search the various websites it says I should use 5100 series 24-065283 upfront for a 2-4" lift. The question is do I just use 2 on each corner or should I be using a different setup cause of the dual shocks?

Thanks!
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
With the Bilstein's I doubt you would need 2 on each corner. I would go to just one in the stock location and abandon the 2nd shock location.
 
OP
OP
Stockbroker5

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
Tab welded onto the knuckle and bracket welded on top that looks like the stock one.
Ill attach a couple of pictures when I figure that out.
 
OP
OP
Stockbroker5

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
10437.jpg


10439.jpg
 
OP
OP
Stockbroker5

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
Ohh and yes I tried to call Bilstein. They are on vacation till January 5th, as well as bronco retailers that sell Bilstein.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
I'd make sure you check the measurements on the rear shocks. The 66' has forward mounting rear shock mounts and the majority of later model EB's have rearward mounting rear shocks. No telling if they're the same compression/rebound lengths between those two styles of mounts. One option for measuring (especially the rear) is to take your current shocks off and go flex it out! You'll quickly find the min/max length required between mount points.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Ohh and yes I tried to call Bilstein. They are on vacation till January 5th, as well as bronco retailers that sell Bilstein.

Well, at least the ones that you called are... ;D Been here answering the phones all day, and will be every day but Thursday this week as far as I know.

The 5100 is a great shock for Broncos that are used moderately. No reason to go with a more expensive model unless you have certain needs.
I agree that, at least initially, you could just go with one per corner, using the front shock that's mounted behind the coil spring. Looks from here like your front-front shock would need to be longer, but the rear mounted one would be the one that the lengths in the catalog are based on.

The 351 is slightly heavier, and it will also make a difference which front springs you're using. Do you know what they are?
The biggest difference to my mind though would be how you intend to use your Bronco.
Which way are you going with that?

Paul
 
OP
OP
Stockbroker5

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
Will be used as a weekend cruiser. Might take it on mild off-road but no crawling or jumping. Not sure which springs are on it. Seems like the PO's rigged a lot of the truck hap-hazardly. Is there any way to tell which springs are on there?
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Follow Pauls lead.
He can answer your eb Bilstein questions. Then you can call WH in the morning and ask for Donk/Paul.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Hard to tell the springs with 100% certainty, but we can take some guesses from info you can provide.

Like lift height: measure between the top of the front axle tube to the bottom of the frame.

Wire diameter: have some calipers you can use? If not, a tape measure will get maybe close enough. Measure the thickness of the coil spring's wire.

How many coils: self explanatory.

Looks like a large diameter wire, but also looks to have some variable rate action going on too. Just looking at the top coils squished down a bit seems to point in that direction.

Maybe a pic of the rear springs too, just for the heck of it.

Paul
 
OP
OP
Stockbroker5

Stockbroker5

Jr. Member
Joined
Dec 28, 2014
Messages
91
Dirt Donk I tried to call you guys and got stuck in a loop of hearing the company info. Any way here's what the specs you asked for are;
Frame to top of front axel 9"
Coil appears to be 5/8" from my best measurement with 11 coils as seen in photo.
Resting height for shocks 17" stock location and 18 3/4" for front double.

Frame to axel in rear is 8 1/2"
Leaf spring has 7 leafs see picture
Resting shock length 19"

24-065283. Fronts
33-186542. Rear


It seems like the Bilsteins I mentioned might be the right fit but want to make sure.

10444.jpg

10445.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Dirt Donk I tried to call you guys and got stuck in a loop of hearing the company info.

Was afraid you'd say that! Sorry about the mess, but with the Holiday short week and two guys out, I was thinking we'd miss some calls.

Frame to top of front axel 9"
Coil appears to be 5/8" from my best measurement with 11 coils as seen in photo.
Resting height for shocks 17" stock location and 18 3/4" for front double.

Sounds like 2.5" variable rate springs with a little of the air let out of them.;D


Frame to axel in rear is 8 1/2"
Leaf spring has 7 leafs see picture
Resting shock length 19"

About 2.5" of lift in the rear. Not sure who's springs from the look. Could be some clean stock ones with add-a-leaves maybe? Skyjacker perhaps?


24-065283. Fronts
33-186542. Rear

It seems like the Bilsteins I mentioned might be the right fit but want to make sure.

Sounds like you're good to go there!

Paul
 
Top