golfobx
Sr. Member
i just did the dana 44 axle swap, now i have disc brakes up front...i have the WH booster/mc and prop valve.
i have bled the brakes 5 times with engine off, and 2 times with engine on...no bubbles noted, and i have someone pumping brakes while i am under there bleeding...i have used a pump bleeder as well...
the rear drums have been adjusted out...
with engine off, the pedal is rock hard, with engine on it goes to complete mush, and has no resistance at all...then its extremely slow to rebound back up
suggestions??
i have bled the brakes 5 times with engine off, and 2 times with engine on...no bubbles noted, and i have someone pumping brakes while i am under there bleeding...i have used a pump bleeder as well...
the rear drums have been adjusted out...
with engine off, the pedal is rock hard, with engine on it goes to complete mush, and has no resistance at all...then its extremely slow to rebound back up
suggestions??











