• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

conversion 1350 ujoint

jperry1290

Sr. Member
Joined
Jul 1, 2010
Messages
920
I just built a 9in with a 1350 yoke so the stock u joints don't fit. Do the conversion u joints let me adapt the shaft to the new 9in w decent strength/reliability? What was the stock ujoint on a 70 EB small bearing 28spline axle?
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
Stock u-joint is a 1310 joint. You need one of these: http://www.summitracing.com/parts/mog-348. I have never heard anything bad about going this route, though if its in your budget, having your drive shaft redone to accept a 1350 joint might be nicer (at least gets you a common joint that can be found anywhere, easily).

If your drive shaft is original, it may be pretty worn out anyway - mine was. 40+ years of previous owners who were not too big on maintenance takes its toll.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
A new slip home with a 1350 end on it will cost just a little bit more than the 1310/1350 co conversion joint, buy the drive shaft end.
 

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,317
Loc.
Huntersville, NC
I did the something for a while till I ordered a new drive shaft. Any oreilys will have the joint. I think the precision one I got was around $25

I believe the spicer part number is 5-460x 1310-1350
napa 348
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I ran the conversion joint but realize they are hard as hell to find in stores. I would do what I did and what others have suggested and order the 1350 slip shaft for your drive shaft.

I'm not 100% sure this is the correct size and spline - but Gabe is a solid choice for ordering Spicer parts.

http://www.northerndrivetrain.com/product/SPI-3-3-3601X.html

spi-3-3-3601x.jpg
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I ran the conversion joint but realize they are hard as hell to find in stores. I would do what I did and what others have suggested and order the 1350 slip shaft for your drive shaft.

I'm not 100% sure this is the correct size and spline - but Gabe is a solid choice for ordering Spicer parts.

http://www.northerndrivetrain.com/product/SPI-3-3-3601X.html

spi-3-3-3601x.jpg

Strange how he ignores the Dana transfer case though.
 

COSCAG00

Sr. Member
Joined
May 16, 2011
Messages
426
I ran the conversion joint but realize they are hard as hell to find in stores. I would do what I did and what others have suggested and order the 1350 slip shaft for your drive shaft.

I'm not 100% sure this is the correct size and spline - but Gabe is a solid choice for ordering Spicer parts.

http://www.northerndrivetrain.com/product/SPI-3-3-3601X.html

spi-3-3-3601x.jpg

If you change out the slip shaft would you need to rebalance the drive shaft? I ask because I am running a conversion joint as well.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
If you change out the slip shaft would you need to rebalance the drive shaft? I ask because I am running a conversion joint as well.

Technically, yes. a driveshaft guy will also tell you that.
From actual experience, maybe. More often no then yes.
 

COSCAG00

Sr. Member
Joined
May 16, 2011
Messages
426
Technically, yes. a driveshaft guy will also tell you that.
From actual experience, maybe. More often no then yes.

Thats kind of what I was hoping. Hard to tell your drive shaft is a little unbalanced with the other 20 things that shake on a Bronco.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Strange how he ignores the Dana transfer case though.

Meh - its not a popular item to go after. He engineers the parts for Max D and Grave D and sells to Jessie and others - super cool guy to have local.
 

driveshafter

Sr. Member
Joined
Jan 11, 2014
Messages
432
Loc.
phoenix az
you need to make sure the yoke is 1,3/8 16 spline ther 75.00 with the ujoint instaled the conversion ujoint is 35.00 you install now3 thats a spicer ujoint i omnly use spicer
 
Top