• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

3spd floor shift, without large cover

chrisd0729

Sr. Member
Joined
Jul 12, 2003
Messages
609
Loc.
Churchville, PA
I picked up another EB this week and love everything about it except for the 3-on-tree shifter. Anyone know of a 3spd floor shift conversion that utilizes a larger boot instead of the large plastic cover? I don't like the look of the large cover AND the truck came with a brand new carpet kit that I'd like to install and assume it won't fit over the cover.

thanks in advance,
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
Find a jeep cj 3 speed and change the top covers. The jeep is a top shift and he bronco is a side shift. That is why you need the big cover on the side of the hump to clear the shift linkage. After that you will have to cut a hole in he top center of the hump and then cut your carpet around that
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
Find a jeep cj 3 speed and change the top covers. The jeep is a top shift and he bronco is a side shift. That is why you need the big cover on the side of the hump to clear the shift linkage. After that you will have to cut a hole in he top center of the hump and then cut your carpet around that

Like this:
 

Attachments

  • 1423135904_781194505_2.jpg
    1423135904_781194505_2.jpg
    71.3 KB · Views: 140
OP
OP
C

chrisd0729

Sr. Member
Joined
Jul 12, 2003
Messages
609
Loc.
Churchville, PA
Find a jeep cj 3 speed and change the top covers. The jeep is a top shift and he bronco is a side shift. That is why you need the big cover on the side of the hump to clear the shift linkage. After that you will have to cut a hole in he top center of the hump and then cut your carpet around that

Sounds exactly what I'm looking for! Anyone know of any documentation or instructions on this?
 
Top