Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
The front eye takes drive torque / wheel hop and twist during wheel travel (the wheels do NOT go straight up and down they actually go up and forward).
Dont know if all springs are made like mine but the "centering pin" hole in my springs are not centered in the spring lengthwise. If mine were installed backwards it would shift the axle .
Dont know if all springs are made like mine but the "centering pin" hole in my springs are not centered in the spring lengthwise. If mine were installed backwards it would shift the axle .
That's exactly why I was asking. My center pin is about 1/2"-5/8" off. By flipping them, I would get that extra clearance for the wheel wells on a LUBR without having to re weld the offset perches. Since my rig is a street truck I have to wonder what the chances are of actually breaking a leaf...?