• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

thread with body measurements?

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
where is the thread with the body measurements?

a neighbor of mine is looking to put his EB back together.

he also has a 72 F-250 on 38s , a K-5 , and a CJ
 
OP
OP
R

roundhouse

Bronco Guru
Joined
Sep 5, 2003
Messages
2,956
e8b178f897f3bde38dcea9b0e9ee9a51.jpg


It's a nice truck
Pretty sure it has a cammed FE engine and a 4 speed granny

He's building a EB body from scratch



Sent from my iPhone using Tapatalk
 

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
e8b178f897f3bde38dcea9b0e9ee9a51.jpg


It's a nice truck
Pretty sure it has a cammed FE engine and a 4 speed granny

He's building a EB body from scratch



Sent from my iPhone using Tapatalk

Good luck, id recommend the pre fabed floor pan. It's made on a jig and is square which makes for a good reference. Everything is built up around it! good luck
 
Top