• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

3 1/2" suspension question

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783
3 1/2" suspension question



Hi all,

I'm setting up a front end and need a static height average for 3.5" front suspension. If you got some time please crawl under your 3.5" suspension lift Bronco on level ground and get me the measurement from the bump stop pedestal to the frame just above it. Please list your spring brand/type, bumper type, general info. Not only will this help me, it will also be interesting to learn variances in different setups. WIN WIN!

Thanks,
Jim
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
Typically if you measure from the top of the axle tube, to the bottom of the frame, stock height is 7". So most 3 1/2" lifts will be in the 10"-11" range. Some basic info to get you started.

Mark
 
OP
OP
J

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783
Typically if you measure from the top of the axle tube, to the bottom of the frame, stock height is 7". So most 3 1/2" lifts will be in the 10"-11" range. Some basic info to get you started.

Mark

Thanks! Good baseline to get started.
 

Action

Sr. Member
Joined
Oct 15, 2004
Messages
579
Yep

Yep....I got about 10 1/4" on mine with old WH springs
 
Top