Holy Bad Pinion Angle

[Skiddy]

Thought I would check what my pinion angle is before I get the axle perches. The drivers side axle perch is 24* and passenger side is 29* up
I am pretty sure after I weld on new perches and move the axle back an 1" that my driveshaft will be to short

 

[mudstud]

Are you going to us the RuffStuff 2+ Perch Kit?

 

[Skiddy]

Are you going to us the RuffStuff 2+ Perch Kit?

not sure about a kit, but yes will be using ruffstuff perches and top plates

 

[mudstud]

I was looking at these http://www.ruffstuffspecialties.com/catalog/2PLUS.html
I have asked if they can be sized for a Bronco.

 

[bronconut73]

https://www.wildhorses4x4.com/product/Anti-Wrap_Leaf_Spring_Perches/early_Bronco_Rear_End

Long leaf spring perches for axle wrap.

Made for an eb axle fellas.

No guessing like at Ruff Stuff, but I do like Rough Stuff.

 

[Skiddy]

I was looking at these http://www.ruffstuffspecialties.com/catalog/2PLUS.html
I have asked if they can be sized for a Bronco.

looks like they could, the issue would be the bronco springs are 2.250 so the perch would need to be narrower to be able to get bolts through it

 

[Skiddy]

https://www.wildhorses4x4.com/product/Anti-Wrap_Leaf_Spring_Perches/early_Bronco_Rear_End

Long leaf spring perches for axle wrap.

Made for an eb axle fellas.

No guessing like at Ruff Stuff, but I do like Rough Stuff.

just get the 2 1/4" wide

 

[sykanr0ng]

I was looking at these http://www.ruffstuffspecialties.com/catalog/2PLUS.html
I have asked if they can be sized for a Bronco.

I emailed RuffStuff about that a while ago and they were not going to make them for 2.25 inch springs.

If you sleeve the bolts with 1/8 inch wall DOM it would take up the space.