Agreed. If you already have the Centech, don't want to try to sell it on or return it to where you bought it to try something else though, you could try to remove the tape and wire ties from the branch junction where the fuse panel wiring enters the main cross branch and see how far you can make it go.
But I'd have to say that it would likely not make it all the way over to where you want it. Likely it'd end up somewhere along the steering column instead.
But I've never tried it, so if you have one already, measure it out to see what can be done.
But as said, it'd be a shame to undo all that nice taped up harness to customize it. Been done many times, but most likely it's due to the Centech's lower price than it is to it being easier to customize.
You can still get a Bronco-specific harness of course, such as the recommended AAW or even the Painless. But if I was contemplating what you are, I'd go for one of the universals too, like was recommended, and even consider one of the Ron Francis harnesses.
They are designed to go just about anywhere (but are big so actually NEED to go over by the pedal location in most EB's) and even have versions that are held in place by a big magnet. That type is super easy to mess with now and later as you can pull the whole fuse panel down to where it's easier to work on.
Another nice feature of many Ron Francis harnesses is the fact that they're terminated at the "load end" instead of the fuse panel end. What that means is that you simply plug the harness into wherever the component is (say the headlights for instance) and then run the bundle of wires from that corner of the rig back to the fuse panel the cleanest or easiest way possible. Easy to terminate at the panel, but this method is likely why the RF fuse panels are larger than most. But they're a cool option.
The magnet thing would be a big benefit I'm thinking, if you use that area under the cowl.
If you want to be super trick and bitchin' wiring-wise, you could use one of these American Autowire HD harnesses:
https://www.wildhorses4x4.com/produ...y-Universal-Harness-Kit/Bronco_Wiring_Harness that pretty much lets you do whatever you want.
Make sure you document what you're doing though, as lots of members would love to see how you lay yours out with the panel in that corner.
Paul