• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

302 Worth?

75Bronc

Sr. Member
Joined
Feb 5, 2008
Messages
425
I have a like new 302 in my bronco. I bought it as a crate motor about 5 years ago. I put probably less than 5,000 miles on it and decided to change the cam. I pulled the motor and put in a comp cams XE256H and matching valve springs, and timing chain. I also put new Rod and Main bearings in it even though it they were still fresh. I have probably less than a thousand miles on it.

Now, I bought an F250 with a ZF and 351W. I am going to swap in the 351W Windsor because well, 49 CI (and stroke).

What price should I list my 302 for? It is a newer 50 oz balance motor. I can sell it complete with 4 barrel manifold, 50 oz flexplate, stock bronco pan and exhaust manifolds. Engine is great. Lots of power, no smoke. Runs perfect.

Thanks for your opinions!
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
It can be hard to sell engines for what they may have in them but it doesn't hurt to put the price up to what you want to get out of it. Give it some time and see what happens. I see a lot of engines such as your describing for near what they would cost retail but I have no idea if that's what they actually end up selling for. If its not selling at the high price you can go lower or reprice based upon any offers you may get.

I rarely sell stuff so pricing is hard for me to guess on. But I do buy stuff but I wouldn't spend a lot of money on a engine that I don't have first hand knowledge of. But that's me. I was looking for a engine to build for my 73 so I was looking for engines. I picked up a 302 that was rebuilt and swapped out for a crate engine for $100 I haven't torn into it yet to see if its good to use but I figured the price was right. Then I picked up a complete 98 explorer engine tranny and tcase along with wiring and computer for $500. Then I picked up a 90's 5.0 with 70K on it from my cousin along with a 351W that needs a rebuild all for $100. So I went from just looking for a builder to getting 4 engines for what Id call good prices.
It may be a good idea to try and sell it before it is swapped out then a buyer could see and hear it run.
 

edmedlin

Full Member
Joined
Sep 26, 2014
Messages
260
Loc.
Republic Missouri
There is little upside in rebuilding the 302 before selling unless you can offer a warranty, which is never done. I have a complete running 302 that I can sell for about $800 as is. If I rebuild it, I would never get that cost back. It is a 70s block with a mild cam. Nothing special. Edelbrock Performer with Edelbrock 4bbl. HP is probably in the high 200s-low 300s. It needs a rebuild which would cost me about $500 more than I could get for it. I could do a "quicky" rebuild with just bearings and seals, but I would hate to do that. I would rather just be honest about it and call it what it is, an old, tired motor.
 

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
Frankly any engine I buy I consider a core, unless it's a fresh documented rebuild from an actual engine builder, with a documented warranty. Frankly I don't care if it has 100 miles on it, it's a core and will be treated as such. So IMO your looking at a $200-500 tops engine.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Unless someone knows this engine well, you are not going to get much for it. It's just another used 302 that someone has been into. Even if the work is first class, there is always skepticism about what is actually in there. An engine that is just sitting on the ground is worth the least. Running out of the vehicle a bit more. Running in the vehicle, can test drive, the best money.
 

McLeod

Full Member
Joined
Jun 29, 2008
Messages
296
You can buy 5.0 & 5.8's in my local wrecking yards for < $300 ea. all day long plus $50 fork lift fee to lift it out.
They have a 30 warranty too.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
You can buy 5.0 & 5.8's in my local wrecking yards for < $300 ea. all day long plus $50 fork lift fee to lift it out.
They have a 30 warranty too.

And that is what you are competing with.

At times it can just make sense to pickle it, put it on the shelf. You know it is good. What future project will you (or someone you know) will need a good 302? At that point you have one and are not looking at $300 engines and wondering if they are any good.
 
OP
OP
75Bronc

75Bronc

Sr. Member
Joined
Feb 5, 2008
Messages
425
Thanks for the help guys. I'll probably keep it as a spare!
 
Top