• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Engine Number Questions

70twocan

Full Member
Joined
Mar 23, 2008
Messages
241
Loc.
Enterprise
I’ve recently pulled the 302 from my 77. I believe I am the 2nd owner. I’m trying to understand the numbers. I understand there wasn’t a specific code that says Bronco, but was one of the others always used in Broncos? For instance did they use truck blocks, Lincoln blocks or others? Looks like the one I just pulled has the numbers for a “Mexican” Lincoln block, cast in May of 77, but the D8 indicates 78. Slightly confused. Would this 302 be a period correct motor for my 77? My block numbers are below.

D8VE-6015-A3A a big “Z”

Then below it in smaller shows
7E2

Any help would be appreciated.
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
There is a pad above the fuel pump which should be stamped with the engine assembly date. You might check it also. The first digit is the year, then an alpha character for the month, and then the day. Mine has another letter after that. “7A24Y” = January 24,1977

d3cc975cb4bc5e20c3902b6ebf009c16.gif
 
OP
OP
70twocan

70twocan

Full Member
Joined
Mar 23, 2008
Messages
241
Loc.
Enterprise
Slowleak, wow what a coincidence your motor was put together the day I was born. I need to buy your truck, Lol.

I’ll look for the other numbers.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Id say that D8 block would not be the block the bronco came with. It should have a D7 or D6 casting or sometimes ever earlier depending on what was left in a production run. Could have been a dealer replacement block as I believe that Z at the end indicates a replacement part. Also D8V would be for a Lincoln. But I'm not sure what casting numbers a mexico block may have but usually Mexican blocks can be identified by extra boss on the front of the engine just under the cylinder head on both sides.
Broncos came with lots of different blocks AE blocks are very common TE can also be found. There may be others as well that are common but it can be hard to say for sure with the passage of time,
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
70twocan- What is the production date, or the vin# of your Bronco? I would expect it to be late May or June of ‘77. Definitely not before May.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Interesting block number..the Lincoln "V" on a 302 in a casting base year (1978) when Lincolns all all received 460s or 400s. I wonder what Ford had in mind there?

Great blocks, those made in Mexico. I've had fantastic luck using those to build very high performance (for their time) offroad racing and boat engines.
 

Slowleak

Bronco Guru
Joined
Sep 12, 2013
Messages
4,013
Loc.
Georgia
Interesting block number..the Lincoln "V" on a 302 in a casting base year (1978) when Lincolns all all received 460s or 400s. I wonder what Ford had in mind there?

Great blocks, those made in Mexico. I've had fantastic luck using those to build very high performance (for their time) offroad racing and boat engines.


Lincoln Versailles and Ford Granada had 302’s in them. From what I have read, the A3A blocks has heavy main caps similar to the Mexican block but did not have the extra bosses cast in near the fuel pump.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
Lincoln Versailles and Ford Granada had 302’s in them. From what I have read, the A3A blocks has heavy main caps similar to the Mexican block but did not have the extra bosses cast in near the fuel pump.

Ahh..the Versailles. I forgot all about that POS. ;D

I've owned a lot of Lincolns...'66 Connie...'75 Connie...'78 Mark. Then I briefly had a '84 Connie...what a letdown. :p

Interesting about the big casting bosses being missing on that later model Mex block. I've had to grind heck out of the one on pass side to clear the large-diameter Carter HV mechanical fuel pumps.
 
Top