• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

WOODWARD FAB bend roll shear machine

ZOSO

Sr. Member
Joined
Jan 25, 2003
Messages
385
Mine is a clark. They work ok but not that great. You really have to bolt it down solid. For making smaller parts they are ok on 18ga. cant do anything thicker.
 

rjrobin2002

Contributor
Bronco Guru
Joined
Oct 13, 2007
Messages
2,951
I have the Woodward Fab throatless sheet metal sheer and am very impressed with the quality and price of my only Woodward tool.
 
OP
OP
bam

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
does anyone else have a suggestion on what to buy. separate machines or a 3:1.
 

rspd505

Jr. Member
Joined
May 3, 2016
Messages
147
Loc.
Rising Sun, IN
does anyone else have a suggestion on what to buy. separate machines or a 3:1.

It really depends on what you are planning on using it for. If you are doing a few parts or projects, the 3 in 1 works ok. If you want more precision bends, find a decent brake. The shear works ok on 3 in 1 but gets iffy on 18 ga.

Like some above said, make sure you bolt a 3 in 1 down solid. Ask me how I know this. For one, if you don't, the frame will flex under pressure and the cast iron will crack. Two, you will turn the damn thing over! I've done both.

I'm good at giving advice but not following it. After repairing and reinforcing the cracked frame, i added a metal brace between the feet and put the thing on casters so I could move it around. Hence scenario number two above.

I still use mine, but only the roller part. I found a great deal on a Tennsmith finger brake and i bought a decent hand held sheet metal shear.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
I have their 20 ton press plates, the 20 ton heavy duty finger brake, the 20 ton goose neck dies, and the flat top adjustable v plate. Saving up for some dimple dies.
 
OP
OP
bam

bam

Contributor
Full Member
Joined
Jun 11, 2017
Messages
291
Loc.
Laurel, Ms
I have their 20 ton press plates, the 20 ton heavy duty finger brake, the 20 ton goose neck dies, and the flat top adjustable v plate. Saving up for some dimple dies.

do you use the harbor freight 20 ton press or another brand.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
For a sheetmetal cutting my wife bought me a Bosh corded sheet metal sheer one Christmas. Between that and a cutting wheel in my 4-1/2 inch grinder Ive never need anything else to cut sheetmetal. Heavy cutting is handled with my gas torch or my sawzall. Maybe some time soon a plasma cutter will find a home.
 
Top