• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Small Dent .. How would you fix this.

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
..OK So how would you guys fix this dent. . I am looking for a secton of the fender in the wanted section.
Not much response so I thought I'd ask here.
SO JUST how would you fix this dent..
It's good metal . Not rusty.. So do you heat & hammer it out. Or cut & replace ..
I've even thought of Cutting it about 2 inches above the Door latch loop.. Hammer that back into place . Then cut & splice the top Cosmetic section into place.
.. What would you do.& can I buy this piece of quarter .
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Well was supposed to be .
 

Attachments

  • DSCN6768.jpg
    DSCN6768.jpg
    79.2 KB · Views: 181
  • DSCN6769.jpg
    DSCN6769.jpg
    83.7 KB · Views: 210
  • DSCN6770.jpg
    DSCN6770.jpg
    93 KB · Views: 210

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
you might have to remove that striker post brace so you can get a hammer in there to work it back out, that's a "big" dent lol
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
you might have to remove that striker post brace so you can get a hammer in there to work it back out, that's a "big" dent lol

thats what I would do. If I couldn't get the lower quarter straight after removing the striker post I would cut part of the front edge off and make a patch.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
.. I've been gathering up parts to build this Bronco for 5 years. Or so!
I've been looking at this Dent since I've owned this Bronco. But somewhere along the line I began to get older. THIS WAS NOT PART OF MY PLAN.
THEN i WENT THROUGH a couple of Financial tough times. Job changes .. Farming Sucks .Stock Markets & Rent houses ..I'd always been able to rebuild my Box before .. But a heart attack & Getting old . I decided I might need to rethink some of the things I wanted to do.
..... I Have never got myself a lift for my shop. SO I'd decided to sell this Red Bronco. But I'D LOOKED AT THIS DENT ONE MORE TIME & I feel if I can fix this dent . I think I can help this Bronco sell faster & I do still enjoy fixing some things.
 

Crush

Contributor
Bronco Guru
Joined
May 30, 2007
Messages
3,463
Loc.
Greenbottom, WV
I would weld a plate to the edge of where the quarter meets the striker post about a 6"long piece. Get a good weld on it. then use a port a power or a winch from another vehicle to pull straight out on it while you tap the door post with a hammer to help straighten it out. applying heat to the striker post will also help make it pull easier. get some pull pressure on it and then heat and hammer. it looks solid enough to not pull apart.

once you get the door post in the shape it is supposed to be you can cut the welded bracket off and grind down the welded area. then you can work on the lower quarter by working from the inside and hammering it or using a dent puller from the outside. I would try this before cutting out the striker post
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Crush I like that thought. I feel it's strong enough Or Solid enough that if I can get enough heat to it .. It should pull out .. & I've felt all along that the Door post striker needs to stay in place. I don't have a porter power .. But do have tractors & Come a longs ... I May have to invest in some big RoseBuds..
Wonder if Harbor Freight sells rosebuds .
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
If it was mine i would drill out the spot welds where the side panel meets the door jamb this will allow the 2 panels to move independently making them much easier to get back in place and straightend up. Get them mostly straight and weld them back up and then do the final body work.
 

Cortez

Bronco Guru
Joined
Jan 29, 2009
Messages
1,205
Pa - if that dent is “small” then I’m a Monkeys Uncle. Your killing me :eek:
 

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
.....how much for the bronco with the dent and how much after it's gone? :)
 

bronkenn

Contributor
Bronco Guy
Joined
Apr 27, 2017
Messages
2,717
Loc.
Southeast Ohio
If it was mine i would drill out the spot welds where the side panel meets the door jamb this will allow the 2 panels to move independently making them much easier to get back in place and straightend up. Get them mostly straight and weld them back up and then do the final body work.

This is how I would begin. Got to get the striker post squared up before you can fix the quarter. Ken
 

needsmoarturbo

Full Member
Joined
May 13, 2015
Messages
278
I was looking at it, without a frame rack I would be using my porra power from harbor freight. Put it up inside the wheel well and use it with some blocks of wood to press it out from the inside if possible
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
... Man lots of good advise. KEEP IT COMING..
I GET A CHUCKLE AT ME CALLING IT A SMALL DENT.
YES IT'S UGLY But It's out in the open & I can get to it from about all angles.
Much better than having a Front door post jammed in about 4 inches & Dash issues & Inner fender & Or frame work.
.. To Me his is just one you work on & tweak a little here & some there. Don't get to excited & NOT IN A HURRY.
 
OP
OP
Pa PITT

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Rydog .. I was not planning to add much to the cost of this Bronco by fixing this dent.
I kind of plan on leaving it on a primer coat. But after my 40+ years of being around this business I figured If this dent is repaired. & a rookie buys it ..
He will have a much better shot at enjoying his Classic.
 
Top