• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Power Brake Booster System Question

bradform

New Member
Joined
Feb 14, 2010
Messages
44
I’m in the process of doing a full drum to disc conversion on my 1974 Bronco. The conversion consists of the Chevy\Ford Disc system up front and Explorer Disc on back. My current question is what to do about my master cylinder replacement………. My initial intent was to add the F250 “Camper Special” and later go with a power assist option (current budget constraints). However, after doing some research on the pros\cons of larger bore master cylinders, I decided to see what options are out there for power assist systems. I don’t have power steering, so my only option was a regular vacuum boost system. After doing some searching. I found what looks like a pretty good deal on CJ Pony Parts. It’s a complete new system (minus a new proportioning valve), but states it’s only designed for Disc\Drum setups. The price is $269 (with the 10% coupon) and free shipping to boot. With other systems for Disc\Disc specific setups, $100-$250 more, my question is as follows: Will this system work with my new Disc\Disc setup? I know it says Disc\Drum in the information, but I’ve read where many people us the non-power assist stock drum master cylinder with no issues. Below is the link to the referenced system on CJ Pony Parts website. Thanks in advance for the input to my question.


https://www.cjponyparts.com/disc-dr...master-cylinder-v8-bronco-1966-1977/p/BBCK23/
 
Last edited:

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Remove the residual pressure valve out of the rear brake port of the MC and it becomes a disc/disc master cylinder.
 

catfan

Contributor
Sr. Member
Joined
Jul 1, 2016
Messages
361
I’m in the process of doing a full drum to disc conversion on my 1974 Bronco. The conversion consists of the Chevy\Ford Disc system up front and Explorer Disc on back. My current question is what to do about my master cylinder replacement………. My initial intent was to add the F250 “Camper Special” and later go with a power assist option (current budget constraints). However, after doing some research on the pros\cons of larger bore master cylinders, I decided to see what options are out there for power assist systems. I don’t have power steering, so my only option was a regular vacuum boost system. After doing some searching. I found what looks like a pretty good deal on CJ Pony Parts. It’s a complete new system (minus a new proportioning valve), but states it’s only designed for Disc\Drum setups. The price is $269 (with the 10% coupon) and free shipping to boot. With other systems for Disc\Disc specific setups, $100-$250 more, my question is as follows: Will this system work with my new Disc\Disc setup? I know it says Disc\Drum in the information, but I’ve read where many people us the non-power assist stock drum master cylinder with no issues. Below is the link to the referenced system on CJ Pony Parts website. Thanks in advance for the input to my question.


https://www.cjponyparts.com/disc-dr...master-cylinder-v8-bronco-1966-1977/p/BBCK23/

The master cylinder is mounted upside down in that picture.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
If you are not going hyrdoboost, then that eBay vacuum booster kit is an amazing deal.

For $179.00....
No tax internet sale
No shipping costs...

Hard to imagine not going with this kit.

Makes me want it, lol...but I am going hyrdoboost.

As was said just remove the residual valve in the port of the MC for the rear/drum circuit.
Easy peasy...

Get this Bud.
Great deal for a non-hyrdoboost eb feller.
 

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
The master cylinder is mounted upside down in that picture.

Hey catfan, you're right! That whole unit, shown as is, would need to rotate 180° just to bolt to the firewall.
The ebay ads show them assembled properly.
 
OP
OP
B

bradform

New Member
Joined
Feb 14, 2010
Messages
44
Thanks to LUBr LuvR for the heads up on eBay and everyone for their input on my question. I just placed my order and will remove the residual pressure valve as described. One last follow up question. Is there a need to replace or modify the original drum\drum proportioning valve?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Not necessarily. But you never really know for sure until you're able to drive the Bronco fully set up.
The original "H-block" is not really a proportioning valve at all. Only the later models with disc brakes got a prop valve.
The h-block is strictly a convenient distribution block and mount for the switch to turn on the brake warning lamp on the dash.

Some of us run the stock master and stock H-block with zero trouble. Others aren't so lucky and have to plumb in a proper proportioning valve.
I have disc/drum setup on my '71 and it's perfectly balanced for my tastes. But when I change to discs in the rear that might all change and I'll need a prop valve too. But I'm not going to install one until I'm sure I need it.
The best way however, especially if your Bronco is heavily modified (or has non-stock rear brakes too by the way!) a single, manually adjustable prop valve plumbed into the rear line only seems the most suitable and hassle-free.

The reason I say "hassle free" is that many of the aftermarket brass prop valves that are made to mimic the factory style, tend to leak around the delay valve and make a mess. Plus they're biased in such a way as the designers felt they should be. But since they don't know your vehicle specifically, the settings for reduction of pressure to the rear brakes is haphazard. You might get the perfect balance, or you might not be so lucky.

Paul
 
Top