• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield Replacement

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
The windshield is gone on my '73.

Is this something a typical windshield company can do or do I need to order seals and glass myself?
 

mattyq17

Bronco Guru
Joined
Jul 11, 2007
Messages
1,600
I ordered my seal from wild horses and got the glass from a local automotive glass store. They are really easy to install yourself, wild horses and toms bronco have videos on their YouTube pages showing you how to do it.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Safelite is the Wal-mart of auto glass. Doesn't surprise me they can't deal with a windshield gasket. There business model is based on gluing in modern windshields.

A Bronco windshield is very much a DIY project. New gasket, soapy water, 2-people. This time of year, add someplace warm. The rubber needs to flex and your hands need feeling in them.
 

JaxLax

Bronco Guru
Joined
Apr 22, 2002
Messages
3,310
Loc.
Jacksonville, FL
It's been said above, but this is a really easy and straight forward job.

I did mine a few weeks ago in about 3 hours BUT I had a 5yo doing the majority of the labor (where he could).

Get some nylon/cotton rope (THIN 50lb test will do) NOT PLASTIC IT'LL TEAR THE EDGE OF THE SEAL and a new seal. Those are the two things you may not have, but will need to install.
1. Throw the new seal in the sunniest area you can find and throw the rope in a small bucket with some soapy water.
2. Cut out old seal and remove windshield. Clean thoroughly.
3. Install new seal on cleaned windshield (sunny spot will help heat/loosen it a bit).
4. Put rope into new seal channel with the two ends overlapping a bit at the middle of the bottom. Take your finger and rub some soapy water in the seal and around the edges of the frame too.
5. Push the windshield down and in as you gently pull the rope out (which will pull the lip of the seal over the frame). Take your time and seesaw 6" at a time. Go slow in corners and work it in big circles to pull the corner up and out.
6. Then up the sides and around the top still seesawing.
7. Done.
 

marshall godron

Contributor
Full Member
Joined
Sep 20, 2011
Messages
232
Just did mine a few weeks ago. Way easy. Got the gasket from WH. N ordered the windshield from amazon it was $100 and they had free shipping with prime
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
FYI... WH's does not ship glass, but Tom's does.. Agreed, it is an easy DIY job... 1st time, maybe you are not feeling it, but when you are done you will be an expert! ;)
 

66BlueGoose

Contributor
Sr. Member
Joined
Feb 6, 2014
Messages
408
If you have time, allocate some extra time in case you run into rust. Popped mine out, found some rust, did a little POR-15 repair before putting back in. Added a few extra hours.
 

JefeAZ

Bronco Guru
Joined
Aug 23, 2011
Messages
3,088
Loc.
Tucson
Have a local shop cut you a custom piece and flush mount it like I did
 

Attachments

  • 20181018_133703.jpg
    20181018_133703.jpg
    102.2 KB · Views: 243

abn373

Contributor
Sr. Member
Joined
Jan 6, 2012
Messages
420
Loc.
Charleston, SC
I had a chain glass place like safelite do mine. It wasn't worth the trouble to mess with it myself and deal with shipping glass and I did nearly every bolt on the whole rebuild myself, they asked which gasket and ordered it and of course brought the new glass. Then called me up and came to my house and the guy installed it in minutes. The cost difference was negligible when you compare shipping glass and gasket vs. a pro bringing it to your garage and you drink a beer and bs for a few mins. This is one job that isn't worth the DYI hassle in my opinion.
 
Top