• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

FL 170 Engines and 3 Speed Manual

Status
Not open for further replies.

AndyT

Full Member
Joined
Jan 16, 2014
Messages
272
I have two inline six cylinders and a 3 speed manual out of my 66. I am looking to get them out of my garage. Unknown on last time the motors have ran. Neither are locked up. I opened the transmission up today and everything looks good inside. Only negative is the bellhousing is cracked. Other than that it appears all good. I'm accepting offers and will trade for different bronco parts. Let me know!


FNG
 

DCP

New Member
Joined
Apr 20, 2019
Messages
14
Good afternoon. Can you tell me the date code on the passenger side of the block? I am restoring a August built 66 and it had a 200 in it. I want to put an original 170 back in it.
 
OP
OP
AndyT

AndyT

Full Member
Joined
Jan 16, 2014
Messages
272
Good afternoon. Can you tell me the date code on the passenger side of the block? I am restoring a August built 66 and it had a 200 in it. I want to put an original 170 back in it.

One is C8DE and the other is possibly C6DE or C8DE. Its hard to tell on the second one.
 

kyle

Bronco Guru
Joined
Nov 2, 2001
Messages
2,199
I’d be interested in the intermediate (adapter) housing off the back of your 3 speed if its still there.
 

kyle

Bronco Guru
Joined
Nov 2, 2001
Messages
2,199
It’s the shorter 6.5” face to face version? Does it have the shaft and gear? Thanks
 

DCP

New Member
Joined
Apr 20, 2019
Messages
14
Thank you for the quick response. There are some additional numbers under the FoMoCo logo. These are the build date. They would be something like 5 H 27.How many freeze plugs does the C8DE block have and how many does the C6DE have?
Thank you
 
OP
OP
AndyT

AndyT

Full Member
Joined
Jan 16, 2014
Messages
272
It’s the shorter 6.5” face to face version? Does it have the shaft and gear? Thanks

Yes Kyle it is 6.5 inches face to face and the shaft and gear is on it.
 
OP
OP
AndyT

AndyT

Full Member
Joined
Jan 16, 2014
Messages
272
Thank you for the quick response. There are some additional numbers under the FoMoCo logo. These are the build date. They would be something like 5 H 27.How many freeze plugs does the C8DE block have and how many does the C6DE have?
Thank you

On the C8DE it has 5 freeze plugs and the build stamp is 9E29. The C6DE also has 5 freeze plugs. The build stamp appears to only say “604” but the number 5H21 is stamped on the top rear of the intake manifold.
 

DCP

New Member
Joined
Apr 20, 2019
Messages
14
Thank you again. Both are 200 cu in. 170 has 3 freeze plugs
 
Status
Not open for further replies.
Top