• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Jaromy, Bro dude! I am floored by your progress. I remember when you first bought this... down in Roseburg, right?

That is amazing work, your are at the top of my Bronco Guru List.

Rock on dude! :cool: ;D

You’re correct ;D

I remember driving it up in the mountains with you guys and it didn’t make it home. Battery, alternator or something like that. I’ve learned a lot along the way.

Far from a guru ;) I ask lots of questions to the right people
 

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
Finished up a rebuild on the 4R70W that I will be using. I'm in the process or ordering all the parts needed to make the swap. Atlas time!! :cool:
mSsXdq1.jpg


Currently working on my roll cage to add the floor bars and a harness bar for the PRP seats that I won at NWBR this year.

bgxu4Mq.jpg

Going from a manual to an auto? What manual did you have?

Second question: what are the two holes in your doors just below the mirrors for?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Going from a manual to an auto? What manual did you have?

Second question: what are the two holes in your doors just below the mirrors for?

Going from a ZF 5 speed.

Those are the holes left over from the bigger truck mirrors. I added some button head screws to clean it up a little.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
A few more pieces showed up that are needed for the 4R70W swap :cool:
zXFmuaw.jpg

lKZS0E5.jpg

CsvCnme.jpg


I have always liked the Switch Pros so I decided to remove my rocker switches and replace them with these. I am planning out how I want to lay out all of the wiring right now.
UD7kgy3.jpg

pXEPOWv.jpg

6RKRwVn.jpg


I got the floor bars installed for the new seats. Maximum clearance in all directions has always been a priority with the cage build. I decided to add some offset into the bars to continue with that theme. More work for 1/2" more clearance ;D
QKuH4Xh.jpg

P8aduxt.jpg

wsJsPlH.jpg
 

jbawall

Contributor
Full Member
Joined
Jul 14, 2004
Messages
330
Loc.
Edgewood, Washington
I am intrigued by the switch-pros. I have been reading their website and watched a few install videos for the last half hour...
Probably should do some actual work...
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
dayuuum Jaromy , some good looking parts right there

I hope I can get some Moab dirt on them soon. Thanks ;)

flange mount front shaft?

1300 Series flanges front and rear. I will be using 1350 all the way through

I am intrigued by the switch-pros. I have been reading their website and watched a few install videos for the last half hour...
Probably should do some actual work...

I have always liked the idea of having switch panels and these should work great. Get to work ;D
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
The switch panels are really nice. They save so much wire and so easily configured and changed in the future. I’ve been contemplating putting one in mine for a light bar and a few other farkles.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
The switch panels are really nice. They save so much wire and so easily configured and changed in the future. I’ve been contemplating putting one in mine for a light bar and a few other farkles.

Mmmmm...farkles ;D Should be a nice addition

Very Nice!

Everything, but really like the switch pro's :cool:

They are pretty cool. If my dash/console turns out the way I have imagined it in my tiny brain, it should look really good and be functional.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Not 100% sure yet. I know they will be mounted in the console within arms reach while strapped in. Probably something simple like this or maybe add a little angle to them so they are even easier to see.
 

Attachments

  • IMG_4452.jpg
    IMG_4452.jpg
    51 KB · Views: 88
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
This is my plan for them right now. The good thing is I will be able to easily modify or change my mind if I want to configure them differently.
 

Attachments

  • Capture.JPG
    Capture.JPG
    33.8 KB · Views: 146

jmhend

Bronco Guru
Joined
Dec 25, 2007
Messages
2,768
I wonder how easily the 3M tape comes off (thinking it could be good and bad if they are really sticky. :eek:

I am super interested in seeing this center console

Did the PRP seats come with heaters or did you have to add them?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I wonder how easily the 3M tape comes off (thinking it could be good and bad if they are really sticky. :eek:

I am super interested in seeing this center console

Did the PRP seats come with heaters or did you have to add them?

3M tape? Not sure where there is tape.

I ordered the seats with heat so I didn’t have to take them apart.
 

.94 OR

Contributor
Bronco Guru
Joined
Jul 5, 2009
Messages
2,215
Loc.
Willamette Valley, OR
Not 100% sure yet. I know they will be mounted in the console within arms reach while strapped in. Probably something simple like this or maybe add a little angle to them so they are even easier to see.

In the picture, your switches have the possibility of being hidden behind a beverage vessel, which could be an issue.

My wife has an Explorer with touchscreen controls mounted on the dash angle. I hate it as there is no support for your hand and the "button" needs to be pressed with the fingertip/fingernail almost and not the pad of the finger if the "switch" was at a shallower angle. It is also read hard for me since I don't drive it daily, to keep my eyes on the road while trying to make adjustments for anything.

Are the back lights for the switches dimmable?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
In the picture, your switches have the possibility of being hidden behind a beverage vessel, which could be an issue.

My wife has an Explorer with touchscreen controls mounted on the dash angle. I hate it as there is no support for your hand and the "button" needs to be pressed with the fingertip/fingernail almost and not the pad of the finger if the "switch" was at a shallower angle. It is also read hard for me since I don't drive it daily, to keep my eyes on the road while trying to make adjustments for anything.

Are the back lights for the switches dimmable?

Makes sense. My console will be set up differently and the cup holders will be at the rear and the panels will be towards the front. That’s the plan right now, but that could change. I need to find room for the Winters shifter and cable shifters as well.
 
Top