• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

what size banjo fitting for thunderbird calipers?

unimogger

Full Member
Joined
Aug 7, 2019
Messages
214
Loc.
Philthadelphia
I'm collecting the parts for my disc brakes. Using 78 F150 knuckles/ hubs/ rotors, I traded my rusty calipers for the thunderbird calipers. Have the 77 bronco hoses that can be drilled out, but I don't have the hollow banjo fitting bolt. Can anyone spec the thread pitch so I can get some ordered? I can't see the thread gauge in the hole well enough to verify the pitch..
 

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I'm collecting the parts for my disc brakes. Using 78 F150 knuckles/ hubs/ rotors, I traded my rusty calipers for the thunderbird calipers. Have the 77 bronco hoses that can be drilled out, but I don't have the hollow banjo fitting bolt. Can anyone spec the thread pitch so I can get some ordered? I can't see the thread gauge in the hole well enough to verify the pitch..

I believe they are 7/16-24”
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
What year T-Bird are these calipers off of?

These were used on a variety of full sized car applications starting in 1972 and ending in 1979 with the Thunderbird being one that used them and was available for that full production span. Others included but were not limited to the LTD/II, Country Squire, Galaxie, (Gran) Torino, etc.
 
OP
OP
U

unimogger

Full Member
Joined
Aug 7, 2019
Messages
214
Loc.
Philthadelphia
Are there off the shelf hoses that will work without drilling the stock ones? Part number or year and model of vehicle?
Not stock, that I have found. The guys at the local FLAPS were super helpful and pulled 20-30 different hoses trying to find something. Several vendors do have steel braided hoses for them, but I'm actually not a fan of them. I prefer rubber, as it's easier to see when there is damage.
 

Jdgephar

Bronco Guru
Joined
Sep 25, 2012
Messages
1,526
Go to amazon and search for this brake hose: B01MTY8XX5

You wont be able to use the banjo bolt, but the 16" stainless hoses and everything else work perfectly.

You will need the small round ends at the caliper to avoid interference with the knuckle.

If you buy stock thunderbird calipers, you may need to mill or grind the surface around the banjo bolt threads to allow the brake line to seat on the copper washers. Many of the vendors sell the calipers with this already done. I'm not sure if doubling up the copper washer on the bottom side would seal properly.

The banjo is 7/16-24 on the Thunderbird calipers.

Sent from my SM-G950U using Tapatalk
 

vintage bronco

Sr. Member
Joined
Feb 8, 2010
Messages
850
if anyone interested I have the T-bird Calipers, slotted / dimpled rotors and matching pads for 76/77 style disc brakes great upgrade all new and factory rebuilt calipers ready to install.
 
Top