• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1966 170 fuel pump

triracer67

Contributor
Sr. Member
Joined
Nov 29, 2010
Messages
672
Vehicle has sat for decades...I’ve gotten it running by putting fuel in one-barrel carb. Put fuel in tank and pump won’t suck fuel. Pulled line at pump and got fuel from tank by sucking. Put line from pump in fuel can, it won’t suck. I did run by putting fuel in carb again hoping engine speed would help pump. It didn’t. Bad pump? It doesn’t look original. Something I’m missing?
 

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
If is tall and has vacuum ports coming out of the top its original .It doubles as a vacuum pump to run the windshield wipers. Post a pic if you can. I bought one a couple of months ago from o'riellys .
frenchy
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
Original would have 10 screws around the top, later models had 8.
 
OP
OP
triracer67

triracer67

Contributor
Sr. Member
Joined
Nov 29, 2010
Messages
672
Well, picture of fuel pump led me to engine tag. Apparently I have a 200. Good news and bad, this will make fuel pump much easier. I’ve never owned a Bronco with inline six (I’ve owned 11), do these engines make decent power?
 

Attachments

  • CB1DDB71-0A45-42A2-BA59-CFB9ADB8CBAB.jpg
    CB1DDB71-0A45-42A2-BA59-CFB9ADB8CBAB.jpg
    92.5 KB · Views: 71
  • F355BBB9-C0C8-4D20-A6F6-CBB1A4A5FA81.jpg
    F355BBB9-C0C8-4D20-A6F6-CBB1A4A5FA81.jpg
    142.1 KB · Views: 73

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Well, picture of fuel pump led me to engine tag. Apparently I have a 200. Good news and bad, this will make fuel pump much easier. I’ve never owned a Bronco with inline six (I’ve owned 11), do these engines make decent power?

Run of the mill aftermarket pump without the vacuum ports for the wipers.

The 200 is a noticeable improvement over the 170, but still pretty gutless for a Bronco.
 

TNcowboy

Full Member
Joined
Aug 29, 2019
Messages
220
I just replaced one on my 67. The quality is not the same as the original. Also beware that the psi may be too high, causing a flooding issue

Specs call for 4 to 6 psi. The replacement is putting out over 8. I installed an inline regulator to drop it back to 4
 
Top