• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Half cab sliding rear window

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
so i'D THOUGH i'D SEEN Doghows72 on here.
But while searching I don't believe he's been on in a long time..
SO ANY ONE KNOW ANY THING ABOUT If maybe he's changed his name .
..................
......... I'M STILL interested in building one of these SLIDING windows .
Has anyone else built one .
... DO We know if just any other window frame could be cut down & Welded back together.
 

ngsd

Contributor
Bronco Guru
Joined
Mar 2, 2019
Messages
2,702
That looks great. I am not a fan of the half cab but that makes me want to use the top!. I just bought a very original U14 and am not sure it I want to put a top on it. This has me thinking. Thanks
 

GB BRONCOS

New Member
Joined
Jan 1, 2021
Messages
1
Nice, I just bought two half cabs and I hope to do the same to mine. Did you tig weld the frame? THX
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
NOW GUY NOTICE DOGHOW has not been on here in several years .
I revised this post hoping him or someone that knew him.Would get him to answer a few more questions .
... Or if anyone else has done this build. can you answer our questions.
Nick's Tricks has most likely done this.
...
I'm thinking There should be a couple more sliders from other donors .. That might be easier to find today.
I kind of live in a small town & we only have one wrecking yard . & He's kind of hard to get stuff from.
..........
............BUT I'd think you could buy a bigger window & cut it down to our size & Weld back together .
....... But we need to find one that we can buy latches for .
..... Because back when I was in the parts business I sold rear sliders for say 72 chevy trucks . & I kept the latches in stock .They needed replacing about once every 2 years it seemed.
 

Kbpony

Sr. Member
Joined
Jan 31, 2012
Messages
386
Hey, Pa, I just did this last spring. It looked like the older Ranger/Mazda sliders had the correct arch across the top, but I ended up buying a loose sliding window that was laying around at one of my local salvage yards. Basically, you need to find a window with 1/2-3/4” crown on top, and good latches. Mine had aluminum top & bottom rails and plastic ends. I took it all apart, cut down the vertical bars to the correct height, and then cut the rounded plastic corners to the correct miters and glued it back together. I painted the aluminum top & bottom rails black before re-assembly. I had a local glass shop cut some laminated glass for it, and another local guy tint it, then put it all together. Instead of using a rubber gasket, I used a heavy bead of black silicone and clamped the window in overnight. So far, it is doing just fine. It wasn’t exactly cheap, though. I think I paid $30-50 for the junk window, a little over $100 for glass, and another $100 for tinting. Close to $250 total.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Thanks KPONY .
Haven't heard from you lately ..
can you either send me a picture to my Call Phone 254-592-5455.
or Post some up here .
...............
...& If anyone else has done the swap send me pictures .
 

Kbpony

Sr. Member
Joined
Jan 31, 2012
Messages
386
KBPony could you have used the original gasket .If you'd had one .

The original gasket on the window was much too big, and I did not have one for the Bronco 1/2 cab. I don’t believe it would have worked, anyway, as the slit in the gasket would be too narrow for the slider.
 
Top