MitchE
New Member
- Joined
- Oct 25, 2020
- Messages
- 43
Hope all of you are safe and well.
Third month with my 75 and getting more and more intimate with the engine tracking down low compression and misfire issues. Thinking of pulling the heads off to inspect the valves. Air coming out exhaust during leak down. Need advice on best way to get at the header bolts as the manifold is bent and pressed up against the left hand bolts. I won't be able to get a socket around the head.
Not sure how to bend it back to straighten out the pipes.
Or should I cut em off and get new headers they are a little rusty at connection.
'75 sport with 302 and 351W heads.
Thanks for all the help
Third month with my 75 and getting more and more intimate with the engine tracking down low compression and misfire issues. Thinking of pulling the heads off to inspect the valves. Air coming out exhaust during leak down. Need advice on best way to get at the header bolts as the manifold is bent and pressed up against the left hand bolts. I won't be able to get a socket around the head.
Not sure how to bend it back to straighten out the pipes.
Or should I cut em off and get new headers they are a little rusty at connection.
'75 sport with 302 and 351W heads.
Thanks for all the help












