• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Currie Enterprises

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
Hey Gang!
So, I have always wanted to upgrade my 3rd member with a Currie outfit including the axles as well. After saving my pennies I contacted Currie today only to find out:
“Hello, Rene I was just informed that we are out of the Bronco axle core you need, sorry about that. Try Moser Engineering or Strange Engineering, they should be able to help you”.

I asked if I could still purchase my desired 3rd member and was told:

“It's probably best to get that from them as well.”

I kind of understand this response.

Wanted to ask if any of you guys have experienced the same with Currie or Moser Engineering or Strange Engineering for that matter?

Thanks!
 

ared77

Contributor
Bronco Guru
Joined
Apr 21, 2013
Messages
3,178
I'm curious, did they give you a reason? Maybe problems getting raw material or employee shortage?
 

CowboyGrin

Contributor
the circus looks like fun
Joined
Jan 20, 2021
Messages
175
Loc.
Oklahoma
Wondering if Currie needs to dedicate what components they do have towards their crate offerings to keep their people busy.
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
I just got a recent quote to rebuild my 9 inch carrier without any issues
They do a lot more for jeeps and maybe they do t have the time for the older stuff
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
I've been waiting on a crate 9" with 35 spline axles from Currie since April 8th.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
Go Moser, I think they look stouter. I have Moser front and Currie rear. I was also impressed at least at the time mosser was made in the uS from US steal just outside Muncie IN..
 
Last edited:

broncorckcrwlr

Sr. Member
Joined
Apr 16, 2004
Messages
399
Loc.
London, Ky
I have Moser axles in the 9 in that was under my trail rig for years and have had great luck with them. I would buy them again.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Currie is good. I think a touch over priced. But they have a good reputation.
I am impressed that they were willing to send you to the competition.
Couple years ago I contacted them about a special axle build. They were not interested at any price. Currie stated they didn't do custom work anymore, only there regular parts. Sounds like they have now narrowed it down even more.

Moser or Strange are both good. Equal or better than Currie for the same price or a little less. Including the center sections. Option lists go on forever.
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
I've been waiting on a crate 9" with 35 spline axles from Currie since April 8th.

Received my shipping notice from Currie on Thursday. Took 14 weeks to the day, from ordering to shipped (was quoted 8-12 weeks when ordering).
 
Last edited:

EricLar80

Bronco Guru
Joined
Jun 14, 2001
Messages
2,170
I just bought a setup from Quick Performance. Price was good compared to the competition.
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
Received my shipping notice from Currie on Thursday. Took 14 weeks to the day, from ordering to shipped (was quoted 8-12 weeks when ordering).

I bought a crate axle from currie in February 2020 and it only took 5 weeks to receive it from the order date. It seems like there is a hold up on a lot of products.
I'm not sure what would hold up the build and shipment of an axle, but 14 weeks is ridiculous.
 

Jamie Chriss

Sr. Member
Joined
Feb 28, 2015
Messages
577
Most likely they have labor shortage! They are putting the time into building Jeep products since that is the lion share of there business, California is a horrible place to run a business under the best circumstance, every small business has a help wanted sign in the door right now.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Most likely they have labor shortage! They are putting the time into building Jeep products since that is the lion share of there business, California is a horrible place to run a business under the best circumstance, every small business has a help wanted sign in the door right now.

Colorado is pretty tough as well. If you want anyone who can pass a piss test.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And not to toot our own horn, but well, I want to toot our horn!
Just to add another option to the list, we normally have stock on all of our Super-9 housings and axle shafts, and a little bit of a wait sometimes on the 3rd member (depending on what you want). https://www.wildhorses4x4.com/category/Bronco_Rear_Housing
Of course, famous last words as I have not checked inventory on the housings before I said that. But our housings are Bronco-specific and even have the vents in the right place and the perches are (supposedly) welded on at the correct angle for use with a suspension lift.

We're certainly not as close to you as Currie is, but sounds like they're out of the game for now. So shipping is involved, or a longer road-trip to pick up. But hey! A great excuse to come up our way and hang out and go on the nickel tour! On your way to Yosemite or Tahoe or wherever.
Make a trip out of it.

Paul
 

67 Halfcab

Full Member
Joined
Nov 20, 2011
Messages
251
And not to toot our own horn, but well, I want to toot our horn!
Just to add another option to the list, we normally have stock on all of our Super-9 housings and axle shafts, and a little bit of a wait sometimes on the 3rd member (depending on what you want). https://www.wildhorses4x4.com/category/Bronco_Rear_Housing
Of course, famous last words as I have not checked inventory on the housings before I said that. But our housings are Bronco-specific and even have the vents in the right place and the perches are (supposedly) welded on at the correct angle for use with a suspension lift.

We're certainly not as close to you as Currie is, but sounds like they're out of the game for now. So shipping is involved, or a longer road-trip to pick up. But hey! A great excuse to come up our way and hang out and go on the nickel tour! On your way to Yosemite or Tahoe or wherever.
Make a trip out of it.

Paul

I was ready to pull the trigger on the Super 9 housing until I saw that it didn't come with Torino ends. Might be a good option to offer in the future.

When I ordered my crate 9" from Currie, they said that parts were trickling in. I just figured the parts for my rear end were stuck on the Ever Given in the Suez Canal . ;D
 

markw

Contributor
Bronco Guru
Joined
Sep 10, 2009
Messages
2,066
Waited 4 months for my Currie D44. Mostly due to wait for parts. Beautiful piece though.
I'd buy the Super 9 from WH with Moser if they put Torino ends on it. Paul???
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
So this is for the Explorer rear disc option? I'll add that to the list of "wannas" and pass it up the chain. We've been very happy with the billet ends in the standard big bearing pattern with 1/2" bolt sizing, but if it's an option to get the ends in another flavor, it would be nice to be able to offer it.

Paul
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
How about offering a fully built crate axle? That's one of the reasons I bought from Currie. Finding a competent mechanic to set everything up isn't always easy.

Being able to bolt it in, fill it with oil, and drive it is appealing to a lot of people.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Sounds good. Thanks for the suggestion.
I've put that idea forth a time or two over the years, but with no movement that I have heard. I think it's still a valid and good idea though, so thanks for mentioning it again.

It should not be beyond our technical expertise in-house, but shipping does become a larger issue once things are assembled and considered one weight and mounted securely on a pallet.
Nothing is an insurmountable problem though, so let's see where this goes.

Paul
 
Top