• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need guidance

tasker

Contributor
all knowing of nothing
Joined
Jun 2, 2006
Messages
21,707
Loc.
NH
WANTED to add as well....I do have some stuff if you are looking for anything
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
after growing my Bronco for 40 years these would be my choices if the 4 speed top loader is a must I would go a little steeper than 4.11 due to the foul first gear. engine wise a 5.0 explorer engine and electrical/ fuel system would be my choice. life isnt getting better for carbs. then a front disc conversion with Hydroboost and power steering. minimum a roll bar and for family a family cage would be better. better seats for the kiddies out back. something with headrests. modern seat belts all around. make sure to evaluate the body structure around the body mounts. you need good safe body structure there. have a safe journey in your quest.
 

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
There is a tag on the toploader . It will tell you if it is a close ratio 4 speed or wide ratio; You will want the wide ratio for your bronco. I have had several toploader 4 speeds with 4.11 gears and 33 tires and they drive very nicely. Not so much for a close ratio...Mark in San Diego. Beach City Brpncos.
 
OP
OP
NickMcAFP

NickMcAFP

Contributor
Jr. Member
Joined
Aug 8, 2021
Messages
83
Loc.
Sturbridge
Yes, you'll see a lot of owners here switching to the 351W. Lots of driving habits, vehicle applications, and opinions hers for sure.
In my experience, the stock 351W is as poopy as a 302, and both benefit from better heads, cam, and induction. The 351W has better torque, but at the price of being less peppy. If you've got a good 302, use it as is. It fits right and it's fun to drive.
I routinely tow my 15' hunting trailer with my Bronco with a 302. I run the flats in overdrive. and grades are a breeze.
The specifics on my Bronco are on my signature.

You have a beautiful truck.

Initially I was planning on going with a mild cam, timing, and headers along with the EFI. I'm not really sure where I am at now though since I'm reevaluating keeping the carb. I want it to have enough power to get out of it's own way comfortably. I think "fun" is the goal. It is my intention to drive it every chance I get and bring the kids around in it, but that's about it.

Thank you for the input!
 
OP
OP
NickMcAFP

NickMcAFP

Contributor
Jr. Member
Joined
Aug 8, 2021
Messages
83
Loc.
Sturbridge
after growing my Bronco for 40 years these would be my choices if the 4 speed top loader is a must I would go a little steeper than 4.11 due to the foul first gear. engine wise a 5.0 explorer engine and electrical/ fuel system would be my choice. life isnt getting better for carbs. then a front disc conversion with Hydroboost and power steering. minimum a roll bar and for family a family cage would be better. better seats for the kiddies out back. something with headrests. modern seat belts all around. make sure to evaluate the body structure around the body mounts. you need good safe body structure there. have a safe journey in your quest.

It is getting a new body pretty much all around. Solid points on the safety items though. I was planning to go disk brakes front and rear. is the hydroboost that noticeable a difference?
 
OP
OP
NickMcAFP

NickMcAFP

Contributor
Jr. Member
Joined
Aug 8, 2021
Messages
83
Loc.
Sturbridge
There is a tag on the toploader . It will tell you if it is a close ratio 4 speed or wide ratio; You will want the wide ratio for your bronco. I have had several toploader 4 speeds with 4.11 gears and 33 tires and they drive very nicely. Not so much for a close ratio...Mark in San Diego. Beach City Brpncos.

It is a wide ratio. The plan is to rebuild it with a lowered first gear as well. Everyone complaining about the first gear had me scared until I discovered the aftermarket 2.90 gear that you can get for it. I really wish I had had the opportunity to drive this thing before we started tearing it apart. I would have a better idea going in as to what I do and don't need.. unfortunately I'm kindof flying blind with a lot of it.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
It is getting a new body pretty much all around. Solid points on the safety items though. I was planning to go disk brakes front and rear. is the hydroboost that noticeable a difference?

yes very noticeable difference especially once you cross the 33 inch tire threshold. I wouldn't waste the money on rear disc especially since you loose the superior rear drum parking brake. but each his own.
 
OP
OP
NickMcAFP

NickMcAFP

Contributor
Jr. Member
Joined
Aug 8, 2021
Messages
83
Loc.
Sturbridge
yes very noticeable difference especially once you cross the 33 inch tire threshold. I wouldn't waste the money on rear disc especially since you loose the superior rear drum parking brake. but each his own.

The parking brake didn't occur to me. My original thought process was more to do with ease of maintenance. That's a valid point though
 

JeepGuy

Contributor
Bronco Guru
Joined
Aug 24, 2006
Messages
1,521
The parking brake didn't occur to me. My original thought process was more to do with ease of maintenance. That's a valid point though


Yup, it's the little things that go a long way. I made that mistake on my jeep and regret not keeping a close to factory e brake set up.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
E-Brake becomes more important when you stop on a steep trail and have to get out to walk a tight spot or help someone. On the street you can live life without a parking brake not so much offroad.
 

Comemonday71

Jr. Member
Joined
Jun 19, 2019
Messages
138
It is a wide ratio. The plan is to rebuild it with a lowered first gear as well. Everyone complaining about the first gear had me scared until I discovered the aftermarket 2.90 gear that you can get for it. I really wish I had had the opportunity to drive this thing before we started tearing it apart. I would have a better idea going in as to what I do and don't need.. unfortunately I'm kindof flying blind with a lot of it.

NickMcAFP, I have a wide ratio toploader also, was curious where you would buy that aftermarket 2.90 first gear? Thanks!
 
Top