• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Manual steering shaft removal

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,317
Loc.
Huntersville, NC
I have bronco that has manual steering, than we are converting to power steering. I was able to get the box out, but haven’t figured out how to get the lower steering shaft out from the column. Any help would be greatly appreciated.
 

Attachments

  • 7A6FFBD1-15FC-498B-8F84-D9D03B01DED1.jpeg
    7A6FFBD1-15FC-498B-8F84-D9D03B01DED1.jpeg
    252.1 KB · Views: 118
  • 74E5A505-0248-4063-81FF-546A3FFDC149.jpeg
    74E5A505-0248-4063-81FF-546A3FFDC149.jpeg
    145.4 KB · Views: 119
  • 0077D197-127C-4B67-8E5D-A38DCA3B113F.jpeg
    0077D197-127C-4B67-8E5D-A38DCA3B113F.jpeg
    223.2 KB · Views: 115

armynavy17

Contributor
Sr. Member
Joined
Jan 9, 2010
Messages
361
I believe you have a one piece shaft. Pull the clip from the bell (pic 2). Bell comes off the shaft and you can press out (hammer) the pin out. Should all be able to come back out the steering column then.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
Loosen the column from the firewall so you can move the shaft to the passenger side of the frame rail and slide it out.

Or, if you don't care about keeping the shaft for anything, cut it in half. Take the lower half out through the hood and the upper half out through the steering column into the cab.
 
OP
OP
snipes243

snipes243

Bronco Guru
Joined
Oct 12, 2006
Messages
1,317
Loc.
Huntersville, NC
Loosen the column from the firewall so you can move the shaft to the passenger side of the frame rail and slide it out.

Or, if you don't care about keeping the shaft for anything, cut it in half. Take the lower half out through the hood and the upper half out through the steering column into the cab.
Can you take the one long piece shaft out and put in a shorter normal size column? Or do you have to get another column.
 

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
Yes you can .. whrn I did mine I used the two piece shafts from a 73..I got used one's from Tom's but ths was back in the early 90's...

If you have fab skills you can also modify cut down add the appropiate u joint and add a custom lower shaft'

Or pretty sure the venders sell set ups for what your trying to do and they probably have a collapsable lower shaft,
 
Top