• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

2.3l ecoboost swap ?

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Is that the 4-cylinder or V6?
Either way, BC Broncos and Icon do seem to do early incursions into the EcoBoost world. Might check their discussions out, or PM member "Cactus killer" here. I think that's Jason's username anyway. Someone can confirm.

Seems like there was one other Bronco specialty place that was dabbling in things like Coyote 5.0 and Eco-Boost swaps.
I'm sure someone here will have other names.

Do you already have an engine, or were just making initial inquiries to see how viable it is?
Good luck on the info hunt.

Paul
 

74BroncoCO

Bronco Guru
Joined
Nov 3, 2004
Messages
2,378
I recall seeing something out there on the interwebs regarding Ecoboost swaps into classic fords, trucks mainly. I know they had a website, so perhaps you can find that??
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
The 2.3 is the 4-cylinder. Base engine on Mustangs and the only engine option on Rangers.
The cool one would be to get one from a Bronco, that would be factory mated to the 7-speed manual.
Getting one to run, whole different story.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,625
Loc.
PNW
Broncobowsher said it, "getting one to run, whole different story".

I called Jason about a 3.5TT swap last fall. He without hesitation stressed that the easiest part was bolting it in. Getting it to fit is a hassle but programming it is a nightmare.

I quote Jason saying, "24 pages of deletes" to tend to. Computer issues with a 3.5 anyway is a major hassle due to almost every year the 3.5 had updates. From one year to the next software was changed, updates were made, none of the years interchange...

He stressed that it's a major undertaking and took a lot of tech's to get one to operate properly. Can be done, but very expensive and full of headaches.

Here's a 3.5TT thread. https://classicbroncos.com/forums/threads/any-3-5-ecoboost-tt-installs-in-a-bronco.313917/

Not sure if the 2.3 has the same potential issues but just a heads up that newer computer controlled motors have lot's of potential programming issues.
 
Last edited:

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Not sure if the 2.3 has the same potential issues but just a heads up that newer computer controlled motors have lot's of potential programming issues.
Add to this that the EPA has been chasing after Tuners, EFI Guy has had to make some Mods to his business plan so that he plays within their Rule book.
 

jimmyv65

Jr. Member
Joined
Aug 13, 2011
Messages
89
I've been digging into the 2.3L as a swap. I haven't found anything on putting one in an EB. There are some interesting things to it with aftermarket adapters to the 302 bellhousing and good aftermarket support for the factory ECU and wiring harness.

One thing I notice is a fair amount of rear overhang to the 2.3L motor. That motor overhang will be a challenge with the EB firewall. It looks like you'd have to move the trans and transfer case forward or heavily mod the firewall.

Dimension Info: https://performanceparts.ford.com/download/PDFS/M-6007-23T_dimensions.pdf
Good swap thread for early mustangs: https://www.vintage-mustang.com/threads/the-big-2-3l-ecoboost-swap-thread.1181267/
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,625
Loc.
PNW
Maybe with that oil pan design the engine can go farther fwd to help with that rear overhang?? Last thing I'd want is more weight up front making the weight bias even worse but ...
 
Top