1buckeyefan1
Sr. Member
- Joined
- Sep 21, 2017
- Messages
- 641
Alright, i've read at least a dozen different threads about why a starter relay is good for the Explorer 5.0 swap. After culling through the dozens of posts debating the semantics of a solenoid vs. relay, i find myself even more confused.
1.) I started with a 2001 Explorer/Mountaineer. I've got through all of my parts and don't have any donor starter relay in my bins.. I'm guessing either I tossed it, or Ford stopped using fender-mounted relays in favor of a Bosch one in this year. I've been going with OEM motorcraft parts for my build and would like to find a OEM relay...if it's really needed?
2.) I'm using a reman Motorcraft SA851 PMGR starter. I'd like to keep my engine bay as clutter-free as possible. I don't plan on hooking a bunch of aux wires off it, like a winch, etc.
3.) I have a Motorcraft SW1951C relay on the way. According to Rockauto, this was used up to 1999 explorers. However, it's a 3 lug.. unsure if this adds value according to Steve83's diagrams i've read through...which show the aux wire running off the I terminal.
https://www.supermotors.net/registry/media/809586_1
4.) Steve83 specifically calls out Motorcraft E9TZ-11450-B, which still has the I terminal, which he connects to the starter as an auxiliary power source (per Bowsher, helps w/ intermittent ignition?)
5.) I'm even more confused by the WH diagram, which calls for putting the starter wire and battery wire on the same terminal.. and using the relay as the aux source?
http://cdn.wildhorses4x4.com/downloads/WH/6038 10-12-09.pdf
6.) I've read most of 904Bronco's posts and know that I need a relay w/ a diode in it to safeguard my ECU, but can't determine which (both?) motorcraft relays contain the diode?
I guess my question is 1.) do I really need a relay, as to reduce the clutter and 2.) should I go with the SW1951C vs. E9TZ-11450-B and how do I wire that extra 12ga wire to the starter?
1.) I started with a 2001 Explorer/Mountaineer. I've got through all of my parts and don't have any donor starter relay in my bins.. I'm guessing either I tossed it, or Ford stopped using fender-mounted relays in favor of a Bosch one in this year. I've been going with OEM motorcraft parts for my build and would like to find a OEM relay...if it's really needed?
2.) I'm using a reman Motorcraft SA851 PMGR starter. I'd like to keep my engine bay as clutter-free as possible. I don't plan on hooking a bunch of aux wires off it, like a winch, etc.
3.) I have a Motorcraft SW1951C relay on the way. According to Rockauto, this was used up to 1999 explorers. However, it's a 3 lug.. unsure if this adds value according to Steve83's diagrams i've read through...which show the aux wire running off the I terminal.
https://www.supermotors.net/registry/media/809586_1
4.) Steve83 specifically calls out Motorcraft E9TZ-11450-B, which still has the I terminal, which he connects to the starter as an auxiliary power source (per Bowsher, helps w/ intermittent ignition?)
5.) I'm even more confused by the WH diagram, which calls for putting the starter wire and battery wire on the same terminal.. and using the relay as the aux source?
http://cdn.wildhorses4x4.com/downloads/WH/6038 10-12-09.pdf
6.) I've read most of 904Bronco's posts and know that I need a relay w/ a diode in it to safeguard my ECU, but can't determine which (both?) motorcraft relays contain the diode?
I guess my question is 1.) do I really need a relay, as to reduce the clutter and 2.) should I go with the SW1951C vs. E9TZ-11450-B and how do I wire that extra 12ga wire to the starter?











