• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

15 inch wheel fitting disc conversion issue

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
I installed a new Dana44 with a chevy conversion disc brake setup. When I was adjusting the track bar, I noticed that the backing plates are 1/8" away from hitting my slot wheels. I was hoping my wheels didn't have this issue, but I was thinking about changing them and this pushes me to do that. If I stick with 15" wheels, I was looking at the Wheel Vintiques Style 62 from SummitRacing, 15x7. https://www.summitracing.com/parts/wvi-62-575504 Has anyone used this 15x7 rim on a chevy disc conversion? I was hoping to see if someone tried already so I don't have to buy a wheel just to check fitting.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
My research, I went 17 inch rims, hard to tell difference from 10 feet away the difference in 15 or 17, and removes all problems with does it fit this or that.
 

ol gray mare

Sr. Member
Joined
Jul 3, 2009
Messages
475
I'm using the 8 inch version of those wheels, and the GM disc conversion. They clear easily.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
As stated those will be fine. Also the modern slots from US Mag, U101, will clear just fine. I’m running them in a 15x9 with GM discs. 1/8” is more than sufficient space as well as long as they spin free
 
OP
OP
hsach

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
I was bouncing back and forth about 15 or 17". I like the look of both, but since I have the 15" slots, I was going to put 32x11.5x15 tires on. I wanted something wider than 10.5 inches and most of the 17" offerings that would fit on an LUBR seemed to be thinner than 11.5". I have a 1" body, 2 1/2" suspension lift and moved the axle back 1". I attached a picture of how close it is to the wheel, makes me nervous a small rock or something will get caught in there and just grind up the rim.

Now I have to go look at some 17" tires/wheels. The closest one I could find to the 32x11.5 was the 285/70R17. Almost the same width, but it is 32.7 inches diameter. I have a friend with a CJ7 and 32x11.5 tires. Same bolt pattern so I can borrow his spare to see how it looks and fits.

Man, just when you think you have things figured out, the bronco shows you who is boss, lol.
 

Attachments

  • 20230607_071426 (2).jpg
    20230607_071426 (2).jpg
    171.6 KB · Views: 215

cldonley

Contributor
Bronco Guru
Joined
Jul 4, 2011
Messages
1,398
Loc.
Robinson, TX
As stated those will be fine. Also the modern slots from US Mag, U101, will clear just fine. I’m running them in a 15x9 with GM discs. 1/8” is more than sufficient space as well as long as they spin free
This ^^. Neither piece will grow or shrink, so any clearance is enough clearance, as long as the spin freely.
 
OP
OP
hsach

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
After a quick search it looks like 285/70R17 is too big to stuff under a LUBR, if I go 17" I probably will look at 275/70R17. 10.8 inches wide vs 11.2 on the 285.

Good to know that the clearance is ok if I want to use my current wheels and stick with 15" tires.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
When your number is up, there is always a rock just the right size to get wedged inside a gap. No matter how small or big it is.
That said, the only rocks I’ve ever seen caught up between a brake and a wheel, or a tire and a body were really big ones!
Not little pebbles that would fit inside an 1/8 inch gap.

Good luck whichever way you go.
 

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,801
Loc.
Sunnyvale, CA
If tape weights are used to balance tires, make sure shop is aware of staay out zone for weights.
 

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
After a quick search it looks like 285/70R17 is too big to stuff under a LUBR, if I go 17" I probably will look at 275/70R17. 10.8 inches wide vs 11.2 on the 285.

Good to know that the clearance is ok if I want to use my current wheels and stick with 15" tires.
Is that on an uncut fenders, I would like to go back to uncut steel rims with Ford hubs, I'm also thinking of an 1" body lift? What do you think?
 
OP
OP
hsach

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
Is that on an uncut fenders, I would like to go back to uncut steel rims with Ford hubs, I'm also thinking of an 1" body lift? What do you think?
My fenders are uncut. I am fairly certain that the 275/70R17 will fit on my 67 if I go that route. Just have to make sure I get the correct wheel for it, like the Dodge wheels Migs used on his. I am trying to stay with the 15" tire for now. I put on a 32x11.5 tire and wheel to test fit the front and rear. Unfortunately the wheel is 9 or 9.5" wide with 3.75" backspacing, so it makes the tire stick out just a little farther than my 15x8 slots with 4" backspace. It gives me a good idea of how the 32's will fit with a different wheel with 4 inches of backspace.

My plan is to buy a 15x7 or 15x8 Wheel Vintique 62 series and mount a 32x11.5 on it. VintiqueWheel Both of the sizes have 4" of backspace and if I am thinking clearly, the 15x8 with a negative 12mm offset puts my outer edge of the tire 1" further outboard than the 15x7 with 0 offset. I am leaning towards the 15x7. I am trying to find some rollers so I don't have to buy a new tire, but 15" truck tires are hard to find used here. Here are some pics of the the borrowed wheel.

I forgot to add, when I rechecked my 15 inch slots, they don't clear the dustshield on the disc brakes. They hit in a few places on both sides so I will be upgrading the wheels anyways.
 

Attachments

  • 20230612_193659.jpg
    20230612_193659.jpg
    206.7 KB · Views: 183
  • 20230612_185641.jpg
    20230612_185641.jpg
    183.4 KB · Views: 192
Last edited:

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
hsach, thanks for the pictures and the good info, I am running 32-11.5-15 right now but I'd like to switch up on the fenders and go back to all original, with that being said I'll probably go to the 275-and to make sure they fit, I'll do the 10.5 but I do like the 17. What kind of lift are you running? I'm on the older side so I don't want to have to climb into the seat, mine is a stock lift as of now and that's why I was thinking of a 1" body lift for the 17. I was checking out a top lift and there's a red bronco don't know the year but it has a really good tire set up, with the stock hubs caps, I can't seem to attach a photo but as soon as I get it down I'll update. It sets just a bit high so I think he's running 17, it looks good though. My Bronco in new to me and I let my wanting another one make bad decisions! So I have a lot of work to do before I get to the new rims and hub caps, if I could find someone to trade is do it but living dual makes it not reasonable!
 
OP
OP
hsach

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
hsach, thanks for the pictures and the good info, I am running 32-11.5-15 right now but I'd like to switch up on the fenders and go back to all original, with that being said I'll probably go to the 275-and to make sure they fit, I'll do the 10.5 but I do like the 17. What kind of lift are you running? I'm on the older side so I don't want to have to climb into the seat, mine is a stock lift as of now and that's why I was thinking of a 1" body lift for the 17. I was checking out a top lift and there's a red bronco don't know the year but it has a really good tire set up, with the stock hubs caps, I can't seem to attach a photo but as soon as I get it down I'll update. It sets just a bit high so I think he's running 17, it looks good though. My Bronco in new to me and I let my wanting another one make bad decisions! So I have a lot of work to do before I get to the new rims and hub caps, if I could find someone to trade is do it but living dual makes it not reasonable!
If you are going back to uncut, I would stay away from the 32x11.5 tires since they would be too wide without any lift, or moving the axle back an 1". I have a 2 1/2" suspension lift, and I moved the axle back to center it in the wheel well. With the 2 1/2 lift, it is already too high for my wife so I will be adding some steps. I am thinking about adding some to my 78 bronco also, tired of jumping up into it, so I definitely know where you are coming from wanting to keep it close to stock height.

I haven't checked the fit of a 275/70R17 yet, but it is a little taller and a little thinner than the 32x11.5x15. Someone who has used this size on a stock suspension height bronco with a body lift will hopefully chime in. If my 15" wheels don't work out, I will move to 17's.

I will post up more pictures when I get my new tires/wheels on. I went with 15x7 wheels with 4" of backspace, the same size I have on there now with the slots. I originally thought they were 15x8, but they are 7". I searched around this week for used tires in 32x11.5 and found that there are NONE available. What I did find was scam artist after scam artist, I really feel sorry for people here that are looking for used tires. I will be buying new tires unfortunately, my current ones are cracked severely and only hold air because I have tubes in them. I really wanted to finish this restore with the old roller tires, but the front disc conversion stopped that quick with the dustshield interference.
 

Attachments

  • 20230613_191814.jpg
    20230613_191814.jpg
    186.5 KB · Views: 161

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
This might sound a bit crazy but depending on how much the dust cover is hitting, couldn't you give it a trim? I really thank you for the great info! I learn a lot off this site. I heard yesterday that with a Ford conversion kit, you can't run 15s? I don't know about moving the axle back or forward, that seems a bit out of my garage knowledge. You must have a good set up! On my 74 I'm just looking at cleaning up a bit and changing a few things and then just driving, speaking of scam turds! I bought my Bronco from a place I trusted and got totally reemed, I made the mistake of site unseen since this place is multi millions and about 2900 miles away. I made the mistake and hope if anyone I can help from my mistake I would be more than happy but I have to just move on and get this beast to Where I can enjoy joy. If 17s push a bit high, what about 16s and then the 1" lift on the body, that might be the kicker! A little shorter on the rim and a bit higher on the body.

I kind of figured my 11.5 weren't going to work I just have to figure the right size, I see you mention 7 and 8s, the one bronco I seen was lifted a bit high and it did look to have a thin tire but it looks goood! It just sets too high for your wife and me, my stock height fits me real well I just need to get the disc brakes conversion and a updated suspension in, as you might tell I have a lot of work, if you were close I'd talk with you on my 32-11.5-15

Appreciate the info!
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I heard yesterday that with a Ford conversion kit, you can't run 15s?
15s fit just fine with the Ford disc conversion. That's the wheel diameter Ford installed from the factory with their disc brake setups.

Todd Z.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
And what most of us with Ford brakes have been using for the almost same number of years.

I would absolutely try trimming, or bending first.
As you said, it depends on how much it is hitting, and where.
And every wheel is manufactured differently. With some cast aluminum wheels being very thick in that area, and perhaps causing more trouble than others.
But I’ve never run across a normal GM brake conversion that would not work with a normal 15 inch wheel.
I’ve only run into interference twice now, and both times I tapped the ears of the backing plate in just slightly and things cleared just fine.
 

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
15s fit just fine with the Ford disc conversion. That's the wheel diameter Ford installed from the factory with their disc brake setups.

Todd Z.
Thanks ToddZ.
That would had been in 77 or maybe 76 on the Bronco, no? I have a 74 and hope be the same as far as the fit!
Thanks for the reply!
 

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
And what most of us with Ford brakes have been using for the almost same number of years.

I would absolutely try trimming, or bending first.
As you said, it depends on how much it is hitting, and where.
And every wheel is manufactured differently. With some cast aluminum wheels being very thick in that area, and perhaps causing more trouble than others.
But I’ve never run across a normal GM brake conversion that would not work with a normal 15 inch wheel.
I’ve only run into interference twice now, and both times I tapped the ears of the backing plate in just slightly and things cleared just fine.
guys

Thanks for replying DirtDonk

I would like to go back to Ford stock rims and 275-10.5-16 with a 1" body lift. I'm running stock right now but before I do the 1" I'd like to go through my suspension to make sure I still can get in the pilots cage!

Thanks again!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
That would had been in 77 or maybe 76 on the Bronco, no?
Yep, started for the 76 model year.
Broncos and the F150s.
I have a 74 and hope be the same as far as the fit!
Thanks for the reply!
Good luck! Hope it fits as easily as the rest of ours.
On my 71 I put the brakes from a 76 (marked as a 75) F150. Bolted right on, and I just had to make spacers for the tie rod ends to fit tightly in the bigger holes.
Now we have adapters…😁
 

MThalfcab

Living the Poor Life
Joined
Aug 11, 2020
Messages
569
Loc.
Roundup , Montana
Yep, started for the 76 model year.
Broncos and the F150s.

Good luck! Hope it fits as easily as the rest of ours.
On my 71 I put the brakes from a 76 (marked as a 75) F150. Bolted right on, and I just had to make spacers for the tie rod ends to fit tightly in the bigger holes.
Now we have adapters…😁

Thanks DiirtDonk, you guy's help us not so mechanical people more than you know!, I have seen and looked at those spacers,

It puts a smile on my days to be back in the Bronco family after 50 years!
 
Top