• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Parts from 78

Adam7118

New Member
Joined
May 12, 2023
Messages
40
I found somebody parting out a 78 bronco. I’m grabbing the transfer case. Wondering what else you guys thought I should cherry pick from it if anything for my 67. I am looking to switch to disc brakes if that matters.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
The front D44 knuckles, complete with spindles and all brake parts, are the perfect disk brake upgrade ...but for an EB 44. Yours would have the D30 originally. The steering box is the one used in the "4x4x2" conversion for a good PS gearbox.

NP205 transfer case? What are you planning to do with that?
 
OP
OP
Adam7118

Adam7118

New Member
Joined
May 12, 2023
Messages
40
I'm doing a coyote swap with a ZF5. The 205 is going on the ZF5. Any suggestions on going disc brake on a D30?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Take the complete front axle. Shorten the passenger side tube.
High pinion Dana 44 with disk brakes and big U-joints. Good caster and good U-joint angle and all the strong parts.
 

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Take the complete front axle. Shorten the passenger side tube.
High pinion Dana 44 with disk brakes and big U-joints. Good caster and good U-joint angle and all the strong parts.
What I did. Works great.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Have you already verified that it’s a 205? And not a 203?
Just checking.

The 9 inch is pretty nice too with the heavy duty housing and 31 spline axles, but just like the front you’d have to shorten it to make it work in the Bronco.
 

FordBronc

Contributor
Bronco's, yea I have a couple.
Joined
Dec 26, 2010
Messages
1,518
Loc.
Polk County, Missouri
Get both complete axles, and IMO do not shorten them, just run them full width.
 

Attachments

  • 19.jpg
    19.jpg
    203.5 KB · Views: 96
  • 20.jpg
    20.jpg
    173.9 KB · Views: 52
Top