• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

6R80

seanwanlass

New Member
Joined
Apr 11, 2011
Messages
26
What's up my fellow EBer's ! Quick question, what is the approx cost in converting to a 6R80? Rebuilt or low mileage donor? I have a 351w not a coyote. Also, either going Atlas or NP205. Thanks
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Hey Sean. Can’t help with the costs or difficulty levels, but I’m gonna be your old grandpa here and tell you to get out and drive that thing for a while! Before you have it torn apart for another long spell.
So fire up the crane, yank the bronco out of the attic, fire it up with all the cool modifications you did 20 years ago, and get out and have some fun with it. 😉😁

And yes folks, I’m serious about Sean‘s attic. 😱
Just ask for some pictures of where the Bronco resided at least for a while in it’s life.
It’s a classic tale of putting a project on hold due to life getting in the way.
 
OP
OP
seanwanlass

seanwanlass

New Member
Joined
Apr 11, 2011
Messages
26
Hey Sean. Can’t help with the costs or difficulty levels, but I’m gonna be your old grandpa here and tell you to get out and drive that thing for a while! Before you have it torn apart for another long spell.
So fire up the crane, yank the bronco out of the attic, fire it up with all the cool modifications you did 20 years ago, and get out and have some fun with it. 😉😁

And yes folks, I’m serious about Sean‘s attic. 😱
Just ask for some pictures of where the Bronco resided at least for a while in it’s life.
It’s a classic tale of putting a project on hold due to life getting in the way.
Too Late Paul!! It's in pieces! 😁 I eventually was able to get it down and moved out to the Central Valley . Unfortunately, there was a flood where it was being stored which resulted in a lot of water damage, lots of rust (POR-15 kinda works) . Shortly I will be starting a detailed build thread on the resurrection......stay tuned. 🤙
 

kman67

Contributor
Full Member
Joined
Apr 8, 2005
Messages
180
Loc.
Aptos
I’ve pondered this as my 3speed Stak pops out of the 3:1, so I only have 1:1 or 5:44:1. It’s nice on the rocks, but not so nice on fireroads. Anyways, I priced it out with an Atlas 3:1 and it was about $10k. Maybe some day.

6R80 remanufactured $4000
Quick 6 $1375
Engine to trans adapter $850
Quick6+adapter bundle $2125
Engine to tranny adapter $430
Total $6600
Atlas 3.0 $3500
Total: $10,055


Sent from my iPhone using Tapatalk
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
I’ve pondered this as my 3speed Stak pops out of the 3:1, so I only have 1:1 or 5:44:1. It’s nice on the rocks, but not so nice on fireroads. Anyways, I priced it out with an Atlas 3:1 and it was about $10k. Maybe some day.

6R80 remanufactured $4000
Quick 6 $1375
Engine to trans adapter $850
Quick6+adapter bundle $2125
Engine to tranny adapter $430
Total $6600
Atlas 3.0 $3500
Total: $10,055


Sent from my iPhone using Tapatalk
If I am reading that right, you are buying two quick 6 controllers.
You can get a good take out trans and use it as is, have not priced one in a few years, ballpark $1k
It is possible to use the original Dana20 with an adaptor, Atlas is not required

But you didn't budget for driveshafts.

So there are many ways this can be done, and many budgets it can turn into. And if you are paying someone else to do the work for you, the price goes way up.
 

distended

Full Member
Joined
Feb 14, 2010
Messages
212
I'm in the middle of this right now.

Don't forget about exhaust or a transmission crossmember unless you're going to make your own.
 
OP
OP
seanwanlass

seanwanlass

New Member
Joined
Apr 11, 2011
Messages
26
If I am reading that right, you are buying two quick 6 controllers.
You can get a good take out trans and use it as is, have not priced one in a few years, ballpark $1k
It is possible to use the original Dana20 with an adaptor, Atlas is not required

But you didn't budget for driveshafts.

So there are many ways this can be done, and many budgets it can turn into. And if you are paying someone else to do the work for you, the price goes way up.
How about cutting out the bell housing for the starter, how big is that hole around the starter, big enough for critters ?
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
You're not confused. Different adapters need different work done to make things fit.

Speed Gems uses a 2" thick spacer and a pig-heavy pc that the TC bolts to.

My new adapter that uses a hub to space the flywheel out is only an inch, same as my old one but Perf. Adapters makes exactly what I have not mass produced yet as I'm not really interested in making them (since I have all I need) but their's is a nice pc and I would recommend it. No bell housing notching needed. The old adapter notching work was minimal but still seems to "freak" people out. Not one of the dozen I know with HARD CORE wheelers all running over 500HP and 500ft lbs torque, meaning LOT'S of torque applied thru gearing and tires has ever had a problem- not one.

6r80's are not a cheap install. IMO unless you drive the thing a LOT off road there isn't a need but others want it because ???? They are a great trans, so is the 4r70W.
 
OP
OP
seanwanlass

seanwanlass

New Member
Joined
Apr 11, 2011
Messages
26
You're not confused. Different adapters need different work done to make things fit.

Speed Gems uses a 2" thick spacer and a pig-heavy pc that the TC bolts to.

My new adapter that uses a hub to space the flywheel out is only an inch, same as my old one but Perf. Adapters makes exactly what I have not mass produced yet as I'm not really interested in making them (since I have all I need) but their's is a nice pc and I would recommend it. No bell housing notching needed. The old adapter notching work was minimal but still seems to "freak" people out. Not one of the dozen I know with HARD CORE wheelers all running over 500HP and 500ft lbs torque, meaning LOT'S of torque applied thru gearing and tires has ever had a problem- not one.

6r80's are not a cheap install. IMO unless you drive the thing a LOT off road there isn't a need but others want it because ???? They are a great trans, so is the 4r70W.
Thanks Brian ! Much appreciated!
 
OP
OP
seanwanlass

seanwanlass

New Member
Joined
Apr 11, 2011
Messages
26
If I am reading that right, you are buying two quick 6 controllers.
You can get a good take out trans and use it as is, have not priced one in a few years, ballpark $1k
It is possible to use the original Dana20 with an adaptor, Atlas is not required

But you didn't budget for driveshafts.

So there are many ways this can be done, and many budgets it can turn into. And if you are paying someone else to do the work for you, the price goes way up.
Thanks Bowsher!
 

BruiserOutdoors

Bronco Guru
Joined
Aug 22, 2013
Messages
1,030
I’ve pondered this as my 3speed Stak pops out of the 3:1, so I only have 1:1 or 5:44:1. It’s nice on the rocks, but not so nice on fireroads. Anyways, I priced it out with an Atlas 3:1 and it was about $10k. Maybe some day.

6R80 remanufactured $4000
Quick 6 $1375
Engine to trans adapter $850
Quick6+adapter bundle $2125
Engine to tranny adapter $430
Total $6600
Atlas 3.0 $3500
Total: $10,055


Sent from my iPhone using Tapatalk
To add:

- you will need a shifter (f150 or other), I am using a RADesigns VX shifter. Add $450.
- Crossmember. $200-400, custom or modify a coyote/6r80 crossmember from vendor.
- transmission cooler and plumbing $500
- engine to 6r80 adapter will likely need some massaging.
- 2" Body Lift
- Driveshafts
- etc...



I haven't got mine running yet but wish I kept it simple and stayed with a 4r70w. I could have been driving my bronco by now if I didn't make this switch! I figure this slowed me down about 1 year of build time to make the necessary changes.
 

idus25

Contributor
Full Member
Joined
Oct 30, 2014
Messages
213
Loc.
St. Louis
I'm in the middle of this right now.

Don't forget about exhaust or a transmission crossmember unless you're going to make your own.
What headers did you end up with? I have WH shorties on the shelf. I'm using PA adapter with their starter. Everything still on shelf not in frame yet.
 

jba6555

Full Member
Joined
Oct 29, 2007
Messages
193
This is a helpful conversation. I have thought about a 6R80 quite a bit. It seems most guys are running it behind Coyotes, Godzillas or seriously built SBFs. I had been thinking that if you ran a 6R80 behind something on the low power side of the bronco world, the 6R would be able to keep that motor in its torque band better and vastly improve the driveability of a stock 302 or even more off the wall a big bell 200. Am I way off base on this? This thread is making me think that even if it did improve the driveability it would not be enough to go to the trouble to do it.
 

.94 OR

Contributor
Bronco Guru
Joined
Jul 5, 2009
Messages
2,215
Loc.
Willamette Valley, OR
I've ran F150's since about 1999. The early ones had manual boxes and the gearing was all messed up. Once I got into the 4 speed autos it was a tad better. 2012 was my first 6R80 and it was a huge improvement. Responded well and seemed to have a gear for everything. I am on my second truck with the 10R80. They seem to have all the gears you need when loaded but quite female in nature as there are too many times it can't make up its mind and it drives me nuts. The 6R hasn't had that tendency.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
jba- the 6r does what the 700r4 did for V6's in Chevy's... it had a low first gear & helped you MOVE off from a stop like you had the torque of a V8!

The 6r is great for keeping you in the torque range of the engine. It is not a cheap upgrade tho. My ONLY real concern about the 6r's is the OSS issues with the valve body. Damn scary and only solved with a Ford computer & harness that's been reprogrammed. Ask me how I know! :(
 
Top