@EFI Guy - a data point per your request in the video (looks like a good tank option, btw), I measured my WH M1A1 tank (2" BL) and it measures 5.5" from the frame rail right in front of the shackle mount to the bottom of the skid plate.
Todd Z.
Thank you Todd! That is good info.
Playing with this one some more it looks like I could slide it back just off the cross-member and make my own mounts, that would let me raise it up potentially another 2 inches. However, it just barely does not clear the rear body cross-member that far back. There is probably 1/8" worth of interference. I'm sure some tapping with a hammer would make it work and my Bronco is no trailer queen, I just don't know how bad I want to try that.
I like the poly and the choice to go with 20 19 gallons and keep more clearance. The deal killer for me I think is going to be diff clearance, I'm working on a 6" stretch and was expecting to need to modify a steel tank, can't do that with poly.
Oh and I wish newly developed tanks would move to the USCAR pump standard that most modern domestics use.
It looks like you could still slide the tank back quite a ways if you make mounts instead of using the front cross-member. But, I'm hesitant to tell anyone to slide a fuel tank closer to a bumper in the event that the bumper has to do it's actual job. I think it would also hurt approach and departure angles sliding the tank back. I guess it depends on how far back you would need to move it.
I'm not against the USCAR standard but I wouldn't trust a tank molded with it. You would have to mold the ring into the tank during production and knowing what he's invested in the tooling likely makes that a deal breaker. I've seen USCAR rings bolted on to steel tanks before. That may be an option if you just had to have it, but I'd just run a Ford pump for simplicity. The guys buying Explorer donors get the hanger for free with the Explorer so that's a small bonus.