• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

GT40P Head valve

galen1970b

Sr. Member
Joined
Jan 3, 2005
Messages
487
Hello! I picked up a set of gt40p heads for my 351w build (just got them drilled and surfaced)., after I tore them down, the exhaust valves are a bit pitted, I've been trying to find a suitable replacement....but It's been difficult to find a 1.450 valve that's 5.080 long. I looked on this Alex Parts website..but it's difficult to navigate(seems broken), I can find a 1.450 valve thats 4.87" just unsure of how much leeway I have when it comes to length and width before it's back to the machine shop. Any help would be appreciated.

-Galen
 
OP
OP
galen1970b

galen1970b

Sr. Member
Joined
Jan 3, 2005
Messages
487
Hello! I picked up a set of gt40p heads for my 351w build (just got them drilled and surfaced)., after I tore them down, the exhaust valves are a bit pitted, I've been trying to find a suitable replacement....but It's been difficult to find a 1.450 valve that's 5.080 long. I looked on this Alex Parts website..but it's difficult to navigate(seems broken), I can find a 1.450 valve thats 4.87" just unsure of how much leeway I have when it comes to length and width before it's back to the machine shop. Any help would be appreciated.

-Galen
I think I may have found a solution in the Melling V1135, My valve seats are in pretty good shape (cleaned up quite a bit while lapping the old set of exhaust valves....but the specs on these are wicked close....Full Send?
Summit Racing Part Number:
MEL-V1135
UPC:
729295182474
Valve Position:
Exhaust
Exhaust Valve Head Diameter (in.):
1.452 in. Mine: 1.450-1.451
Exhaust Valve Head Diameter (mm):
36.881mm Mine: 36.83mm
Exhaust Valve Stem Diameter (in.):
0.342 in. Mine: 341-342 depending on where you measure(im assuming wear)
Exhaust Valve Stem Diameter (mm):
8.69mm Mine: 8.66mm like i said...probably worn a lil bit..
Exhaust Overall Valve Length (in.):
5.068 in. Mine: 5.072
Exhaust Overall Valve Length (mm):
128.727mm Mine: 128.9mm
 

bronco italiano

Bronco Guru
Joined
Feb 1, 2004
Messages
2,595
Unless your familiar with rebuilding cylinder heads, it would save you time and possible future problems to have a competent machine shop rebuild them and supply the parts. Nothing worse that a cylinder head that has some type of failure.
 
Top