• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1966 170 fuel pump

rmk57

Sr. Member
Joined
Feb 24, 2016
Messages
580
Mine started squirting gas from what looks like a bypass hole on the housing.
Is there anyone who sells a rebuild kit for these? I would prefer to keep my original one if possible.
 

needabronco

Bronco Guru
Joined
Jul 2, 2004
Messages
6,411
Loc.
Prescott/Farmington
As of about 18 months ago you could still get them from new from Napa, there were also a few other places that had them. Try looking them up online. Rebuild kits were available then too. Sorry I don't have any up to date knowledge.
 

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
They haven't made 10 screw 66 6cyl fuel pumps since ???? The late 60's? Not sure, ive only seen one oem for sale ever. Looking for rebuild kits now.
 

hucklburry rev2

Sr. Member
Joined
Jan 17, 2006
Messages
772
I bought a replacement last summer and kept the original on the shelf, the new one seems nice and no issues, around $100 if I recall, I got it either from napa or oreilly.
 

metal1

Full Member
Joined
May 2, 2016
Messages
260
Loc.
hidesert ,socal
I was looking for the similar pump for my 289 and napa only had the 6 cyld model this was 6 mos ago ,maybe it is still available from them
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I found an old guy that sells all manner of rebuild kits for old fuel pumps. I got a kit from him to rebuild the one on my '66. I'll see if I can find the link.
 
OP
OP
rmk57

rmk57

Sr. Member
Joined
Feb 24, 2016
Messages
580
I haven't taken it off or apart to see exactly what the problem is but suspect it's the diaphragm ruptured or something along that line. I would really like to just rebuild rather than replace but I may have to buy a complete unit and as someone else said put the oem one on the shelf for now.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I haven't taken it off or apart to see exactly what the problem is but suspect it's the diaphragm ruptured or something along that line. I would really like to just rebuild rather than replace but I may have to buy a complete unit and as someone else said put the oem one on the shelf for now.

Both of the ones that failed on me recently, it was from expansion of the little rubber diaphragm in the check valves. They get cupped..scalloped even..and stop sealing.
 

66Uncut

Full Member
Joined
Oct 20, 2012
Messages
278
They haven't made 10 screw 66 6cyl fuel pumps since ???? The late 60's? Not sure, ive only seen one oem for sale ever. Looking for rebuild kits now.

@okie4570 After learning about 10 screw fuel pumps back in 2013 I had been on the search for one and finally found one a few years ago. Being the slacker that I am, I still haven't installed it. I'm hoping to get around to it by the end of the year :D

carter_m4192.png


Since the post of yours that I quoted was from 2017, I don't know if Then-And-Now had M4192 rebuild kits back then but they are available now if you're still looking:
 
Last edited by a moderator:

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
@okie4570 After learning about 10 screw fuel pumps back in 2013 I had been on the search for one and finally found one a few years ago. Being the slacker that I am, I still haven't installed it. I'm hoping to get around to it by the end of the year :D

carter_m4192.png


Since the post of yours that I quoted was from 2017, I don't know if Then-And-Now had M4192 rebuild kits back then but they are available now if you're still looking:

Awesome thank you. I've got 3 that need rebuilt.
 
Last edited by a moderator:

green61bug

Contributor
Bronco Guru
Joined
Mar 25, 2018
Messages
1,116
Loc.
Greensboro
I've been searching for a rebuild kit for a 10 bolt this morning and haven't had any luck. Curious if any of you have a solution or source for a kit. The link provided earlier in the thread doesn't seem to work.
 

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
The link provided earlier in the thread doesn't seem to work
It was a link to Then and Now Automotive, but it looks like their website got hijacked or abandoned and now auto-forwards to pure spam. So I deleted the link.

If you're interested, I'd Google them for their phone number, but don’t click any links to their website.
 
Top