WHere did you guys get your windshields? I need a new one...

[71BroncoBoy]

And cheap if possible, should i just order from tom's for $150 plush shipping or can an autoglass company in town do it for me? thanks for the help

 

[jarrod]

I just got mine locally I called a few shops and went with the lowest one I think I paid 120 installed one thing was that my gasket was still good but I think they are under 20 dollars. Good luck!

 

[ransil]

call you local windshield places, when I replaced mine it was in stock local so it only took 1 day to get it. Call all the places listed to find the best price, if you are installing it make sure you let them know it will be cheaper.
Get a new gasket from the Bronco vendors. I paid about $100.

 

[clarrance]

I can get the from a local glass shop for $75.00 just give them the measurements and they will cut it. and it is DOT appoved.

 

[wildbill]

Auto glass shop 125.00 installed sb Ca. Good luck ;D ;D ;D Bill %) ;D

 

[mhandy]

local auto glass shop. $100 tinted. if they don't have it in stock they can cut it

 

[A4x4Junky]

Another vote for finding the shopping around to find the best price. If you are comfortable with putting it in and dont need it NOW a vendor might be able to help you out. Putting it in yourself will save ya money for sure. I have a few glass places locally and any time I have needed a window prices have been all over the place.

Anthony

 

[deltarat]

Local glass shop $80.25 installed. Measure the windshield and call and ask for safety glass that size. Some shops want to charge more for a windshield than safety glass, even when they would cut both from the same sheet of glass. I would replace the gasket at the same time.

 

[71BroncoBoy]

awesome guys, thanks for the input I have a new windshield gasket here, so next week Ill be installing the rollbar and getting a windshield too...then maybe my rig will look a little more presentable

 

[Pa PITT]

I bought 2 and they only cost me 45.00 each ..........

 

[TOFIC]

Pappit beat mine. 54.50 installed in plain glass. local glass shop is where.
It is flat glass so no problems for any good shop

 

[lonesouth]

let me know where you end up going. mine is impossible to see through at night....

 

[HotWheels]

I got mine from Genuine Auto Glass in Tacoma, WA. SoI'm sure they are avalble. It even ahd the updated shaded area at the top of the windshield. I like it.

 

[TOFIC]

I figures HotWheels had to have his shades on!! LOL
Mick, what did you have to pay for that hunk of glass and who made it?
TOFIC

 

[HotWheels]

I figures HotWheels had to have his shades on!! LOL
Mick, what did you have to pay for that hunk of glass and who made it?
TOFIC

120 dollars installed at my house.

 

[71BroncoBoy]

do you guys by any chance have the dimensions I need for the windshield or will the shop just do it themselves...heading to the glass shop on thursday

 

[TOFIC]

They will measure the old one and make a duplicate. not too worry, it is pretty hard to screw up a Bronco windshield. You would have to work at making a mistake on one.
TOFIC

 

[71BroncoBoy]

They will measure the old one and make a duplicate. not too worry, it is pretty hard to screw up a Bronco windshield. You would have to work at making a mistake on one.
TOFIC

awesome thanks for the help once again...

 

[SaddleUp]

When you call around be sure to let them know that it is just flat glass. They will often rattle off a cost that assumes that it is either curved or that you don't know that flat glass is a lot cheaper.

 

[Dachy]

anyone ever remove one from one windshield frame and install in another themselves? is this something that should be left to the pros?