Support underneath passenger side floor

[hunter1]

I need a picture and measurements of the support that goes underneath the passenger side upper floor. It looks like a piece of upside-down hat channel about 1-1/4" wide maybe, with a threaded square nut maybe, can't remember for sure. Could be a support for the passenger side seat bracket? Thought I had taken a picture of this before disassembly, but I cannot find it now. I am to the point of primer, seam sealing, and raptor lining the bottom of the tub and would like to install this piece before doing so. This is what I have to do it with, just need the location and measurements of the hole / holes before welding it in and drilling? Thanks

 

[DirtDonk]

Sorry no measurements, but are you talking about the one under the pan at the back of the seats (raised portion), or front including the hump like seen under the assembly like this:

At least I think those are the main two. There should be one more, but can't quite picture where it goes in my head.

Paul

 

[DirtDonk]

I believe this is the upper rear one:

That last detail in the pic, is that the seat anchor brace boss you were asking about?

Paul

 

[hunter1]

I'm talking about the two smaller brackets in the picture of the assembled floor pan you posted running the length of the raised portion of the seat mount on the passenger side between the middle and rear floor support. Glad you showed this, I didn't realize there were two of them. If anyone has the measurements where they locate underneath would be great. I guess I could just set the seat in and drill holes where the supports land though.