• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Turn Signal Intermittent "Super" Cancel

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
Ha!! Maybe that’s my issue, I didn’t even realize it but mine is broken too in the same spot! I had two pins that came out of the steering wheel adapter but they made a god awful clicking noise, which was probably what broke my signal piece.
Well, solved my TS canceling issue. I had the same gawd awful clicking noise and have gone thru several TS switches over the years to solve the problem. Honestly, I can't remember when I had cancelling turn signals. I bought a TS switch from Dennis Carpenter and noticed right away the plastic arms were much better spaced than the switch I was replacing. Once back together, the nuisance clicking sound was gone and my signals cancel like they should. Job done.
IMG_3914.JPG
Now why doesn't my horn work?
 

Oldtimer

Contributor
Jr. Member with Sr. moments
Joined
Feb 4, 2005
Messages
1,801
Loc.
Sunnyvale, CA
I was waiting for this question.
Looking at your photos I wondered if the copper foil on the bottom side of the adapter was worn thru. There was another photo posted (gr8scott I think) that has an additional piece of copper on his adapter.
 

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
There was another photo posted (gr8scott I think) that has an additional piece of copper on his adapter.

Yeah, mine was wore through as well (no horn). Instead of buying a replacement adapter for $80 (and have it wear through as well)
I bought a copper sheet, cut a "donut" out of it and soldered it onto the adapter.
 

Rox Crusher

Bronco Guru
Joined
Dec 13, 2008
Messages
2,830
Not a Grant adapter, but you get the idea.
Thank you for providing this picture.

I have a GT Performance wheel on mine. I also had to cut down / shorten the feet as they were rubbing the face of the turn signal switch.
 

H20rider

Jr. Member
Joined
Jul 14, 2021
Messages
106
I replaced the cancelling switch /horn contact pin assembly (due to worn out floating horn contacts), and was getting erratic turn signal behavior. The indicators particularly on one side would often not switch off, and sometimeswould switch on when I just swerved the steering wheel. There were no shorts. I did notice that the cancelling arms were not positioned evenly.

The problem was easily solved by GENTLY heating the bend in the cancelling arm that was too close to the center, and molding it to the same position as the other arm…then making sure it cooled in that position.
 
Top