Search results

Hi Everyone, I did a little searching for this; but, I can't really figure which sill plates I have, or the best way to install them. I purchased some stainless steel script sill plates from another member a few years ago. Just now getting around to installing them. The sill plates have holes...

Hi Everyone, I've read a few threads that are close to what I am needing help with. There are a couple of differences that I should explain. The motor in question is a 347 stroker. It has a Holley Truck Avenger carb setup. The previous owner installed a PCV valve toward the back of the...

Hi Everyone, I know it's tough to troubleshoot electrical in a forum. That being said, I was hoping maybe someone else has experienced something similar to what is going on with me and the '70. The motor is a 347 stroker. Ignition is MSD 6 Offroad with Rev Control and an MSD electronic...

Hi, I have the senders for the oil pressure gauge and the engine temperature gauge available now, too. I had to change out to ones which work with the stock gauges. Price reduced. I'm hoping this link will work for reference. (The thread is showing as being closed.)...

Hi, *** Sale Pending *** Price reduced. I'm selling five American Eagle Model No. 58 slotted aluminum wheels and five Mickey Thompson Baja Claws. The tires are 35" x 13.5" x 15"LT. Four of the tires have approximately 40% tread left and one has never been on the pavement. There are some...

Hi, I've been holding onto this rear seat for over 10 years. It's not doing me any good at the moment, so I am listing for sale. (The pictures are from 2013. The seat has been on a shelf in the garage since. I can provide confirming pictures if interested.) Located in Indianapolis. I'll...

Hey Everyone, I hope it's okay to post this in the regular Bronco Chat Forum. There are three Bronco-skinned vehicles running in this year's King of the Hammers. The three are: - Vaughn Kittin Jr. - Loren Healy - Jason Scherer I don't have the car numbers. Today is qualifying. Qualifying...

Hi Everyone, I've been holding on to the two remaining 50th Anniversary badges that I have thinking I'd dress up the Broncos. I'm not sure that's going to happen. (I had two others that I gave as gifts to a couple friends.) I figure I can use what I make from the badges (if they sell) to help...

Hi, I'm not in a big hurry... but, I thought I should start looking for a spare tire for the '70 Bronco. I want it to match the other four. It's a: bf goodrich km3 lt255/85r16 I have one on order locally; but, it's being quoted as a 3 month backorder. Thanks, Jeff

Hey Everyone, After a lot of years the '70 is getting close to completion. It has the heart of moderate trail rig, and the body of a pretty nice street Bronco. Thinking about changing from the 35" MT Baja Claws which would require cutting to 33" (metric equivalent) MT3s that shouldn't require...

Hi, (Interior pics added.) I have a hard top that I purchased with a '70 Bronco in late 2011. I've been holding onto it thinking I'd like to install it on one of the Broncos; but, it just hasn't happened, so I'm thinking it would be best to sell it if someone is interested. The top has spent...

Hi Everyone, Before buying new tires and wheels for a build that's almost finished, I thought I would see if anyone close to Indy has anything for sale or trade. The Bronco is more of a trail rig. 3-1/2" suspension lift, 2" body lift, built with lockers and trail gear, including heavy front...

Hi Everyone, Yesterday I had heard that local hotels, rental condos and camping in Moab were going to prohibit anyone other than locals from staying. Yesterday Easter Jeep announced that the 2020 event has been cancelled. Very serious stuff. I hope everyone stays healthy. Jeff

Hi Everyone, I received a call yesterday from the secured lot where we keep the trailer we tow to Moab every year. Long story short, they had a suspicion it had been stolen since I was there last on March 2nd. After talking with them, and having them go through their surveillance videos they...

Hi, Just thought I'd check to see if anyone has a Gear Banger shifter for an NP435 that they are looking to sell. It will go into a new build, so I'm looking for something in pretty decent condition. Thanks, Jeff

Hi Everyone, We're finally getting the '70 Bronco running again. It has been dormant for almost 7 years. After getting the engine fired up, one of the first things that became apparent was that the power steering pump overflow problem was not corrected by replacement of hoses. I am attaching...

Hey Everyone, After trying to make parts of two existing harnesses work, we came to the conclusion that we should just bite the bullet and buy a 28-circuit Painless harness with switches. (Ouch!) We're trying to figure the best location for the fuse panel. We're adding a Tuffy glove box to...

Hey Everyone, I know they're pretty rare. I just thought I'd see if anyone has a Painless 10113 that they no longer want. I've found some reasonable (but still high) prices online for new. Just thought I would check here before pulling the trigger for a new retail version. Located in Indy...

Hey Everyone, I thought I remembered reading on the forum (somewhere) that someone had installed a fuse panel on some sort of slide-out bracket under the dash. It's been a number of years ago, and my searching hasn't been very successful. Specifically I'm looking to mount a Ron Francis...

Hi, Looking to purchase new (or like new) Tuffy 8" center console with stereo compartment and Tuffy glove box. I thought I'd check here before ordering online. Located in Indianapolis. Thanks, Jeff