Search results

i'm currently storing my bronco top in a storage unit down the street. rates are doubling so im looking to move out. my buddy has graciously offered his shop as a place to store the top. i never use my hardtop and im thinking of storing it in an upright position. has anyone built a box/frame...

call me lazy. i suppose i could take my wheels off and measure. hahaha. are the front studs the same length as the rear studs? 77 bronco

I put new 31 spline axles in last summer. I'd say i probably have 200 miles or less on the SET20s. I bought that new Range rear brake disc conversion and i'll need to remove the axles to install the caliper brackets. Range is recommending I replace the SET20s again. Whats everyone's thoughts...

There's so much info on the internet on either option, but i'd really like to get some tribal knowledge from the Bronco community. From what i've read, Duraspark is a nice affordable option with easy off the shelf replacements at the local NAPA. RTR (whether its MSD, Performance Igntion, etc)...

Can anyone confirm that the correct 80s SBF bellhousing with hydraulic slave cylinder bracket is E4TA-7505-DA? I'm somewhat new to these IDs and I also see E4TZ-7505-C pop up as being the same bellhousing. Does anyone also know if clearance there's issues with the headers/slave cylinder running...

has anyone installed this yet? i'm looking for ways to add a hydraulic clutch without piecing together parts from cars. i'm not totally opposed to fabbing brackets but an off the shelf kit would be nice...

finishing my front bumper and contemplating if i should add a bull bar or not. what's everyone's opinion? if i add one it'll be this one from Barnes https://barnes4wd.com/products/miter-cut-diy-bull-bar?srsltid=AfmBOoqg2N5jkPHB4TmZjLEyEUxaVzVcLchyyoBAd5rgHpc-6x7mWmW0 bull bar would look cool...

I've done a bit of googling on this and can't seem to find results and reviews on applying Raptor liner with a high density foam roller. I've seen plenty of spray on and normal foam roller applications, but I'm specifically looking to use a high density foam roller. I don't like the lumps and...

doing some research on here and the WWW. I see TBP and WH offer a mini starter too. Does anyone know what brand these are? is there newer tech out there or a better brand to go with?

looking for a set of TBP Impact bumpers or something similar in profile. front without winch preferred rear with or without tire carrier

I'd like to add some metal rear trim panels to my 77, but I can't seem to find good pictures of the differences between 77s and pre-77. Due to the way my roll cage is mounted i'd likely modify the rear trim panels just a tad past the rear fender. I'm wondering if i can use a pre-77 panel and...

new custom 6x9 speaker enclosures. i also have JBL 6x9 Concert 3ways (with grilles) for sale. low hours on the speakers, maybe 6hrs? enclosures $45 speakers $50

Searched a little, but didn't see anything other than folks fitting 6.5" speakers on the rear panels. Does anyone know if there's a company that makes custom subwoofer enclosures for your early bronco? I'm currently running a JBL Basspro 8" and looking to go 12". Kicker makes a down firing...

i'm running the james duff (LCR) gas tank. I've finally gotten the bronco out for the spring and took a short drive to the gas station to fill her up. I put about 12 gallons of gas in the tank. Got home and parked the bronco and noticed its leaking fuel at the EFI return port. I have this...

I plan to eventually swap to an AX15, but that won't be for likely 3-5 years? In the meantime, I've noticed my 3 speeds leaks a decent amount at the shift linkages. Is it worth just replacing the seals/gaskets or should i just rebuild the thing? I'm debating investing any more effort into this...

picked these up at the local Target! the kids found them! no adult shirts tho

after switching to a rear fold and tumble seat, i swapped to 3pt belts. anyone need some lap belts?

My bronco is a street rig. I'm considering the WH armor plate bumpers since i don't run a winch or spare carrier. Seems like a great option, affordable, and makes the bronco look a little sportier. Has anyone bought one of these and customized it, like wrap around corners? prerunner bar...

I'm redoing the fuel line from the tank to the pump since I just installed a Duff gas tank. I already have a 40micron filter located just before the carb. I picked up another fuel filter thats 100 micron that i was gonna put in just past the pick up before going into the hardline along the...

my back up lights have never worked. a few years ago i learned that my car was originally an auto converted to a 3speed on the floor hurst shifter. i'm finally getting around to installing the back up switch on the hurst shifter. since this bronco started as an auto, i could use some advice on...