Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I've got a nice set of black vent windows with good glass. Good working pivots and no rust. Need to get $450 for the pair. PM me if you want them. I'm just south of Portland.
Wanted NEW One or Two Mickey Thompson ATZP3 31/10.50/R15 tires. Discontinued tires, an unable to source at tire shops. Anyone have a lead on overstock or singles - appreciate your reply.
p/n is 90000001902
Regards, Brian
Hi, I have a V8 cast iron bell housing. Do you also need the clutch pivot brackets and release bearing fork? I'm in Oregon, so will need to be shipped.
One other thing to check - the factory washers (upper one limits rotation, bottom one sits against spring) have flats that engage the stud. If someone used std round washers instead, that might explain your looseness issue. But more likely issues is broken stud. See my tech tip on repairing...
I've got a partial set of factory bolts - used, but if you are going for a concours look, best bet is to buy AMK bolts new. These match factory exactly, and you don't risk breaking 50 year old hardware. Check out NPD p/n #9432-5A. Good luck.
For a lower cost alternative to Tuffy steel, try Quadratec p/n 31501. So far I'm pleased with it's function, quality, and fit.
Ultimate Console for 76-95 Jeep CJ & Wrangler YJ
I've been unhappy for years running bulk heater hose to the heater core at the firewall and dealing with sloppy hose routing. Finally found a clean solution I thought I'd share with others. I spent 15 minutes with the O'Reilly's auto parts kid and found a molded hose p/n that fits the bill...
My '77 doesn't use the cable extenders. The cable equalizer is unique to '77 as it connects directly to the primary cable w/o the pivot arm. See photo.
@73bronco302 Sent you a pm with photos - let me know if you still want the hardtop window trim set. Thx
Still have lots of chrome trim plus full windshield set off a 69 Sport in good shape.
Rocker piece is sold - sorry on that.... (@bam)
The beltline trim requires molding clips that bolt on, and rivet on to body - you should be able to buy just the fasteners (see Tom's 4239 kit). (@73bronco302). I'll pull together a set of the hardtop trim for you and pm with photos and price.
The 1 should be an L as all Broncos were built with Michigan Plant location L. Here's a good link to check out. http://www.broncohio.com/tech/ebvins.html