• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    77Â’ Bronco factory ignition wiring help

    I've been trying to follow this thread and see a few points that I have to clarify. First the stock Duraspark was the most dependable you could use. There's no reason to change individual components for convenience or some weird idea that other systems did things differently so injecting those...
  2. J

    351W distributor recommendation

    Made in Mexico shouldn't be a problem. A lot of Fords were mostly or totally made in Mexico.
  3. J

    351W distributor recommendation

    If you buy an ignition module get a Motorcraft US made version, not a Chicom knock off. I've run mine since 1981 with no problem. It's far more reliable than knock offs.
  4. J

    351W distributor recommendation

    The difference between 302 and 351 distributors is the size of the oil pump drive. So the lower distributor shaft is part defining what engine it works on. The rest of the distributor is the same. Also the electronic distributor was the same from '75-'77. Only the '76/'77 were what Ford later...
  5. J

    Need help Identifying Holly and Choke cover

    As I pointed out, the carburetor is a 2300. The List#7508 and 7509 were the first of the 2300 economy models. These are also emissions carbs with reverse idle mixture adjusting screws. A rebuilding kit will walk you through all the adjustments and that carb definitely needs a cleaning and...
  6. J

    Need help Identifying Holly and Choke cover

    The choke thermostat cover is common with most any Holley 4150, 4160, or 2300. There's nothing special about it. The 2300 it came off is an economy 2300 that Ford had Holley build as replacements for 2150 Motorcrafts and variable venturi Motorcrafts. The VV replacement Holleys had the linkage...
  7. J

    Anyone have a part number for a decent mechanical fuel pump?

    In Tucson we have a huge population of '50s-'80s trucks on the road and 1 real parts store ie one that's not a chain store. So far AirTex seems to be the favorite. Many years of replacing mechanical pumps made Carter my choice. Most OE pumps were Carters too. Now I believe they're made by...
  8. J

    Steering gear box play

    Thanks to Broncobowsher I found the 2008 does have rack and pinion and a big aluminum sub-chassis. I only owned the car for about 6 hrs. The other 8 Panther body cars I've owned had a steering box. My '77 EB got the box rebuilt and now is tighter than new. Any '70s truck is loose compared to...
  9. J

    Steering gear box play

    I wish I knew how the new steering boxes were built with no play or slack. I just bought a 2008 Crown Vic unmarked police interceptor and I'm floored by how tight the steering is even though it has over 100 thousand miles. The same model from the 90s was nowhere near as tight. The steering box...
  10. J

    GM TBI, Qjet or Auotlite 4100?

    It's interesting to hear people predict future problems and claim you're having problems now. What a load of BS. I've had no problems with OE Ford 2 and 4 barrels. I see no reason to do a GM carb and plenty of reasons not to. AFBs, AVSs, and Holley 4150/4160s work fine for a daily driver and...
  11. J

    Carb heat soak ideas

    The after market heads are either made for racing or EFI. Racing has very limited application for 4X4s and EFI atomizes the fuel with high pressure through tiny orifices placed at the intake port. The cross over is upstream of the injectors so no fuel touches the heated bottom of the intake...
  12. J

    Dropped a wrench in the frame rail

    Do a few max effort brake tests should bring it to the front of the frame. Anyone who drove trucks knows the freight always works it's way to the front of the cargo compartment over time. The magnet idea surprised me. I tried a magnet to get a nut out of the oil pan. All I found was the steel...
  13. J

    GM TBI, Qjet or Auotlite 4100?

    I chose a 1.08 venturi 4100. They have the off camber abilities of the 2100. I've seen EBs nearly laying on their side and still running. We didn't have EFI or any fuel injection. Those of us that bought new Broncos, knew they were inexpensive and plentiful. So we pushed the limits in every kind...
  14. J

    original seats

    There several that work. I got '69 Mustang head rests that work and look great. A '69 Galaxy I had used lower ones that wouldn't give the same safety I was looking for. My wife was rear ended in the Galaxy and suffered severe whip lash. Remember what they're made for. I know the '69 Mustang head...
  15. J

    Electric vehicles becoming the futureÂ…

    It's sad that our power hungry corrupt government has no respect for freedom in fact they hate it. That's what this is about. The self anointed coastal elites want to wipe out freedom to travel by others. If you think it's about climate change you're not thinking. You're just obedience signaling.
  16. J

    Air Intake and Carb Options

    That intake is the EGR type and post '73 so the EGR hole is very difficult to block off because it's elongated. That's why I recommended a '72 and earlier intake with no EGR. That would be the only potential upgrade. The new looking carb should be a Motorcraft 2150. There are no new ones. If...
  17. J

    Manual to automatic swap transfer shifter question

    I put a '77 C4 in my '68 and everything went right in. The late auto column, radiator and power steering went in with it. I put an automatic 351 at the same time. The T shifter bolted right onto the adapter. The hole in the floor is the same for J and T shifters. Both work on any EB V8 adapter...
  18. J

    Carb heat soak ideas

    Holley makes an insulating gasket that includes a shield under the float bowl here;https://www.summitracing.com/parts/hly-108-52. This would block more of the radiant and convection heat from the top of the intake. The 2100 is already the best carb for resisting percolation and in my experience...
  19. J

    Any use a GT350 hood scoop?

    The area above the EB hood has both high and low pressure areas when moving. The area just ahead of the windshield has the highest pressure. So mounting the hood scoop backwards would have the best likelihood of getting air into the engine compartment. Notice where the vent and heater intake...
  20. J

    YA-159 Fan?

    When looking closely at the ebey example, it looks very close to the OE fan. It's a couple years newer design so it has double thickness leading edge on each blade but otherwise is the same. It's a good price and new. It is a flexible blade like the OE '66-'77 Bronco fan. I haven't found a...
Top