• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Air Intake and Carb Options

    You have yet to clarify what year intake and carb you're talking about. If this is a '76, the carb is a Motorcraft 2150 with 1.08" venturis. These intakes are EGR types so they more holes to leak and a unique aluminum EGR spacer that often are eroded by exhaust gases. They can be replaced with...
  2. J

    Caster update

    The 3.5 degree caster has proven quite adequate with a stock suspension. So some PO must have suffered from the typical EB urge to over do everything.
  3. J

    77 Bronco flywheel question

    C4 used a 28oz. flex plate. Later as in the mid '80s the imbalance went to 50oz.
  4. J

    Wiring problems

    The speedometer is run by a spinning cable.
  5. J

    Generating lackluster power out of my 77 302

    There really isn't anything wrong with the heads, intake, carb, exhaust, or cam. Cam and ignition timing are the problem. I went through endless part swaps and emissions test fights from '77 on. The big parts are shared by earlier engines so is the compression ratio. It's the timing, both...
  6. J

    Prop valve adapter. Why can't the simple things not be easy?

    I simply rebuilt the OE Kelsey Hayes valve. No surprise, all the fittings are correct. The rebuild requires at least some mechanical abillity so few go this route.
  7. J

    Newbie

    I recommend avoiding Cal. rather than avoiding '76/'77 Broncos. There are many advantages to this approach, including freedom.
  8. J

    Powertrain Advice

    Where is this purist you claimed is in you? It seems you're building an EB with purely non EB parts.
  9. J

    exhaust routing, What's the best exit location?

    A duel exhaust may have been made in a factory, just not a Ford factory. That aside there was a less noisy horn for places like NYC where the din of honking is obnoxious. So a quieter exhaust would make sense. I'd like an exhaust that sounds like a Lincoln Navigator, in other words nearly...
  10. J

    exhaust routing, What's the best exit location?

    Back on the subject of hangers, my coil spring hanger has been misplaced and I can't find it. I still may have it tho. I had a hard time getting a muffler shop to even consider originality. They all think they have a better idea of how to do it. One knuckle head hung the exhaust from a floor brace.
  11. J

    exhaust routing, What's the best exit location?

    The O2 sensor and wide band A/F gauge are effective in identifying lean and rich mixtures in either full or part throttle. It tells you when the power valve opens and if the power valve channel restriction needs to be enlarged. Altitude vs. mixture can be quantified and correctly adjusted. So...
  12. J

    What distributor for 351W?

    This article;http://vb.foureyedpride.com/showthread.php?22229-The-Ultimate-Duraspark-Distributor-Timing-Guide, describes how to set an ideal timing curve, including the vacuum advance.
  13. J

    alternator oddity

    Did the amp meter indicate a high load output of the alternator? With a largely discharged battery, the amp meter reads the full 65 amps.
  14. J

    exhaust routing, What's the best exit location?

    I wish I knew what a low noise option would have been. My '77 was the last one they had in stock. The '78s were already out and I knew I didn't want a chopped short F150. I had to take what was there. The option list was short and it looked like it was tailored to plowing. I never considered...
  15. J

    What distributor for 351W?

    The 1980 351 Motorcraft distributor serves me well and I can see no reason for any other.
  16. J

    77 Help

    Nothing in this thread is uniquely applicable to '77s. All EBs have these same issues after 40-50 yrs.
  17. J

    exhaust routing, What's the best exit location?

    Also my '77 had no Thermactor (air injection).
  18. J

    exhaust routing, What's the best exit location?

    I find it hard to believe any above bought a '77 new, as I did. Another problem is the lack of specifics. Sure they all exit behind the tire, but how far? Most stock EB systems wrap the pipe around the tire and point down. These were vulnerable to bends when backing against an object. The as new...
  19. J

    Clunking in dash area at low speed

    What I think Pa Pitt suggested is an orderly trouble shooting process that finds the source of the clunking sound. Shimmy isn't a sound and is likely a suspension/tire issue. Hearing is only somewhat directional and getting your ears under the dash should help in locating the source. You may be...
  20. J

    exhaust routing, What's the best exit location?

    The stock '77 exhaust was nothing like that. The rear stock hanger itself is behind the tire. On '77s the tube extends past the hanger to just in front of the rear bumper where it turns 90 degrees to exit to the side with a tip turned down. Mine is as close as I could get without a bender. When...
Top