• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Carb hangs up

    Since no '76 2150 carburetors have built since '76, I have to wonder if what you have is ChiCom knock off. The ChiComs haven't attempted to make 2100 carbs that Ford used in '68s. I'm also interested in what you mean by eliminating the linkage. Did you simply disconnect the throttle rod from the...
  2. J

    Stock Air Cleaner Assembly, pictures, diagrams,and opinions...

    You opened this thread asking about a stock air cleaner. You have to consider those were made for carburetors. If you're talking about EFI you're clearly not interested in or motivated to have a stock induction. As to weather it's an improvement. That's debatable and has nothing to with what was...
  3. J

    I've developed a timing issue...What am I missing here?

    I've got 6 or 7 pick up coils and there is no difference in the relationship of coil's core and the vacuum advance pin. What I'm reading looks more like the distributor was installed with the gear 1 tooth off. The would put the relationship of the coil to the armature off enough to only...
  4. J

    2nd gen bronco that Ford never made

    Oddly, a double murderer saved the Bronco name from further destruction.
  5. J

    Turn signal switch

    You need to define what you mean by a late switch. When adapting my '77 harness to work my '78 turn signal switch I grounded one wire in the steering wheel itself by drilling and threading a hole in the steel part of the spoke. It now functions with the '77 horn relay. The '78 switch was used...
  6. J

    Dipstick tube 302 oil pan issue with long headers

    We're still stuck with vague descriptions that can't be quantified. Pulling the pan may help a little, but with an assembled engine I'm going to use a stock dip stick and tube for a 302 and add 1/4" stick length for the longer 351 crank throw.
  7. J

    302 carburetor replacement

    I found this;https://www.ebay.com/itm/174800798163?hash=item28b2f081d3:g:6b4AAOSwYehgxPlG, one on ebey. It's a '77 2150 made for 302s in good shape for a good price. You really can't beat it for a quality carb. It could use a rebuild and needs cleaning but there's no corrosion. It's as good as...
  8. J

    2nd gen bronco that Ford never made

    What they were calling a '74 Shorthorn looked like a 2 door Falcon wagon. Not very appealing.
  9. J

    2nd gen bronco that Ford never made

    They did a lot of weird things under the Bronco name. None of what I saw, would have been an improvement over what we know of as the early Bronco. Ford never got the concept that we love. That goofy Bronco woody was a joke.
  10. J

    Bronco things to in Colorado springs.

    Too bad about Bronco Hut. I met and liked them. But that was many years ago so I qualified my post.
  11. J

    C4 Question

    The vacuum modulator regulates part throttle shifts along with the governor, The kick down lever effects full throttle shifts. Neither would cause or cure the 2-3 shift flair.
  12. J

    Dipstick tube 302 oil pan issue with long headers

    The big problem with a DIY dip stick tube is no clear way to know what length is correct for a given dip stick. Among the 5 Ford dip sticks I've collected there are no clear cut hash marks that define the best oil level. The '80s 351 Panther dip stick (often dishonestly described as a 351...
  13. J

    Bronco things to in Colorado springs.

    I know Bronco Hut at least had a shop in Castle Rock that's north of Co. Springs on I 25.
  14. J

    Tailgate "anti-theft" "finger" install

    The early 2 post design on my '68 moved laterally with only friction to slow it. In short order they wore 2 big notches in the weather seal. The latch bolts also wore the holes in the strike plates that were impossible to replace at the time. The single post is mechanically held in place. It's...
  15. J

    Steering column support dimensions

    I could measure the holes, but it would just as easy to send my spare from my '68. Just PM your address. I think 10 bucks would cover the shipping if not that's OK.
  16. J

    Any carb tuning wizards?

    The 1.08" venturi 2100s were usually equipped with 47 jets. The few 1.14" venturi 2100s I've been able find the specs on, had 50 jets.
  17. J

    Any carb tuning wizards?

    The 1.14" venturi 2100s were all used on 289/302 engines. But none on EBs, that were all 1.08". The 1.08" 2100s appear on ebey regularly and are preferable for EBs. With a little patience you can get one. I don't trust the big rebuilders that often lie. They seem to toss all the ID tags to hide...
  18. J

    Fuel Sending Unit

    The only EB sending unit that needs the the tank dropped is the '77 main tank. The others can be done in place. You just have to do it with the fuel level below the hole.
  19. J

    Carb Guru’s

    I guess you're back to a situation that makes no logical sense.
  20. J

    Tailgate "anti-theft" "finger" install

    Just look at this photo;https://tomsoffroad.com/parts/67-77-ford-bronco-tailgate-anti-theft-post-kit. You can see there is plate that goes into the tail gate that's got 2 threaded holes. It's a loose part that has to be held on the inside surface till the bolts are started.
Top