• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. J

    Hei distributor with 200????

    Just read this;http://www.ifsja.org/forums/vb/showthread.php?t=19440.
  2. J

    70 Bronco caught fire

    Ford fixed all the real ignition problems when they developed the Duraspark ignition in '76. In '77 a large diameter distributor cap was added to control the higher voltage. The tendency to go to speed shops by the uninformed resulted in bad decisions. Speed shop parts are even worse than chain...
  3. J

    C4 Modulator

    Viperwolf may know. I could never find any info on these. I only know my '77 C4 came with a yellow stripe. That said, I bet the green stripe would work as well.
  4. J

    Starting Issues

    Duralast just means AutoZone. I hope you're not confusing them with Motorcraft Duraspark.
  5. J

    Starting Issues

    The photos of the relay and coil don't include the most important info ie what's stamped on the steel mount of the relay and printed on the side of the coil with the manufacturer and model. The new ChiCom crap is less likely to work than the old parts they replace.
  6. J

    351 aluminum inatake install questions

    I ran a 4bbl '69 intake with '87 heads for over 20 yrs. it worked perfectly. I still believe it's the best low profile intake for any 351W. The weight of the cast iron is the only downside. The extra holes go right into the water jacket of post '74 heads. Then the plugs ARE NEEDED. Only with the...
  7. J

    Starting Issues

    The obvious questions are. Is there a stream of fuel from the accelerator pump nozzles when the the throttle is moved? Is there a spark at the end of the plug or coil wires?
  8. J

    Body flex

    What specific ie. make and part number fan was involved not just the category such a flex or fixed blade. Something had to bend or flex far too much.
  9. J

    Changed ignition module now starter wont disengage.

    As Paul points out kat has used vague descriptions starting with the initial post. When he said our modules, he sure wasn't talking about mine and it took 3 posts on his part to finally mention the brand/manufacturer of his module. We still don't know if the starter relay has been replaced. It's...
  10. J

    Changed ignition module now starter wont disengage.

    I've got 4 identical magnetic pickup assemblies (Ford calls them armatures) and have seen hundreds. So I would have to see just one that's different to believe there were different types, including whatever O'Rielley's sells. When starter relays stick it sometimes works to hit it with a screw...
  11. J

    Greasing linkage for Clutch Pedal

    The original parts work perfectly well if cleaned and lubed. The knee jerk reaction to go to after market replacement parts has no basis in fact.
  12. J

    Adding return line carbureted

    The problem you describe isn't vapor lock. Vapor lock is fuel evaporating in the fuel line so no fuel gets to the fuel pump. It first manifests when the engine needs increased fuel during acceleration or climbing a grade. Heat soak after the engine is shut down boils the fuel both in the float...
  13. J

    Changed ignition module now starter wont disengage.

    I'd love to see a photo of 2 V8 magnetic pickup assemblies that are different in any way. Until then, I'll continue to believe they are all the same. I didn't know Az. has the market cornered on Motorcraft ignition modules. I do know that RockAuto has the best price.
  14. J

    Changed ignition module now starter wont disengage.

    This is the correct part;https://www.rockauto.com/en/moreinfo.php?pk=385933&cc=1121588&pt=7172&jsn=538
  15. J

    Adding return line carbureted

    I have never had vapor lock in my '77 with a stock system, for the 45 yrs. I've been driving it. But it only gets to 115 here. I stupidly tried an inline filter between the tank and the mechanical pump. That did vapor lock. I've also seen vapor lock in large trucks with fuel lines twice as long...
  16. J

    Changed ignition module now starter wont disengage.

    It sounds like the starter relay is sticking. What ignition modules are you talking about? There are a ton of ChiCom garbage modules that do quit. The US made Motorcraft modules are the only ones to buy. I've had some luck with Standard Ignition modules too. But the best bet is Motorcraft.
  17. J

    Caulk/sealer

    This Eastwood stuff was what the restoration shop used on my '77. https://www.eastwood.com/autobody/seam-sealer.html?msclkid=cdad5432c25b1ab1708e353328a347d8
  18. J

    351 aluminum inatake install questions

    See post #12. I doubt anyone could provide a more precise description of the needed plugs. The only pre-'70 351 was the '69, that was identical. The '69/'70 block had 0.023" less deck height than later blocks. Otherwise the year of the block is irrelevant. The spark plug diameter, was changed...
  19. J

    351 aluminum inatake install questions

    A little research into the Shelby intake disclosed that they were made by Buddy Bar.
  20. J

    351 aluminum inatake install questions

    I used 1/8" NPT 1/4" hex socket drive plugs.
Top