• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JSBX

    Super Celebration East Roll Call

    I am glad you brought this up because I need to register. Will have to bring my trail rig but I will be there if it is the good Lords will. Should be a couple of us leaving from Columbia Louisiana,
  2. JSBX

    Another Gearing Question - 4R70W and Blueprint 306 w/ 35s

    I am running a mild built 351W, 4R70W, 35's and 4.56 gears. It has only been on the high way, no off-roading. It seems to be perfect for me. Has great acceleration and will pull hills in overdrive with no problem. 4.88's might be a little better but I am satisfied with the 4.56's.
  3. JSBX

    Hole in the center of drivers floor board...

    If it is in the floor could be for the clutch rod.
  4. JSBX

    Mounting 1/4 thick Rock Ski's

    I have the ones from Duff. They use 3/8 nutserts in the outside of the rocker panel near the top and 1" flat bar along the inside bottom lip with nuts welded to the flat bar. There is a you tube video on how to install them. May give you some ideas to help with your install.
  5. JSBX

    Exhaust system recommendation

    Duff has some good systems. I went with one of theirs on one of my Broncos and a custom exhaust system from a exhaust shop on another. Most of the vendors have bolt on exhaust systems.
  6. JSBX

    SOLD Fuel sending unit for 23 gallon rear tanks - New option

    I am interested in the longer one for my BC Broncos tank.
  7. JSBX

    Merry Christmas All

    Merry Christmas and happy holidays. May all stockings be stuffed with vendor gift cards.
  8. JSBX

    Reworking dash using a dash overlay

    Dash I have one of my Broncos at the body shop having a frame off paint job. I have my dash on my welding table and plan on cutting out the center section and installing an overlay that I won at OCBR a couple years ago. I am going to weld it in. It is going to have a custom layout with...
  9. JSBX

    Engine Identification Help

    As B RON Co said. There is a number on the block right above the starter area. I cleaned the area with degreaser and used my phone to take a picture of the numbers. You can use those numbers to find out what the engine came out of.
  10. JSBX

    351w vs 5.0 Explorer

    Another vote here for a 351 W. That is what I have in my 74 and love it. It is a mild built engine with a Q-Jet carb. I have the explorer front dress and it runs cool. I have a 69 with a built 5.0, mustang fuel injection and explorer front dress. The 5.0 revs quicker but I love the torque of the...
  11. JSBX

    Starter motor feed wire routing

    I ran mine on top of the frame using cushing clamps. I installed the clamps from the top using a 1/4" cordless impact with a long extension and self tapping screws.
  12. JSBX

    No power. No nothing. Out of ideas.

    Check the bullet connector behind the ammeter. I did something similar and the bullet connector burnt causing the same problem.
  13. JSBX

    2nd dairy.. secondary.. heaters . Whose got one .

    He could try a 190 degree thermostat but my Dad ran with cardboard in front of the radiator in the winter and it work great.
  14. JSBX

    Urgent Exhaust Advice Needed

    Magnaflow makes some good sounding performance mufflers. You can go to you tube and listen to sound clips of different mufflers on Broncos and get an idea how they sound.
  15. JSBX

    Rear bucket seat options

    Seat I bought a seat out of a Transit van from a company that installs wheel chair lifts. It looks like it will fit two small adults or children. It is a 32" wide seat for two with two 3 point seat belts integrated in the seat. It is a high back seat and with the bottom factory mount removed...
  16. JSBX

    TN 2020 Super Celebration Parts Thread!

    Needed Need complete parking brake system. Need everything except the two rear cables.
  17. JSBX

    Saginaw P/S Pump bracket for 351W

    Bracket I bought my bracket for a 351 from BC Broncos.
  18. JSBX

    cam for 96 5.8 with carb

    cam I know nothing about cams so i went with the recommendation of my engine builder, He installed a Howards cam with these numbers per cam card. intake is ,517 lift and 264.6 duration. exhaust is .523 and 270.6 and also went with roller rockers. Heads are GT 40 from a 96 Explorer with shorty...
  19. JSBX

    AR 2020 OCBR Parts for Sale, Swap, Trade

    Needed I need every thing to put a parking brake back in my 69 Bronco. Need everything except the two rear cables. Will buy complete system or any parts you might have.
  20. JSBX

    Having devil of a time with spindle washer removal

    Put a punch flat on the washer and hit it with a hammer a couple of times moving around on the washer then try getting behind the washer with a pick that has the 90 degree bend at the end and pull it out. May need 2 of these picks This has worked for me at times.
Top