Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
This works great for removing and installing doors. I have a small engine hoist [3/4 ton] that is one of the best tools in my shop. I am 70 years old and after 2 back surgeries it is almost a necessity. As others stated get the shims they are a lot easier to use then washers. A small impact gun...
I have Hagerty on both my broncos. One of them is mostly a trail rig and I realize that I can not and will not make a claim if something happens while off road. I needed good insurance for all the other bad things that might happen to them. That being said I just received a Hagerty Drivers Club...
I had something similar happen to me years ago. I would try pulling the spark plugs and see if one is damaged. If so you will at least know what side it is on. You can get an inexpensive bore scope camera and may be able to see how much damage you have and again at least know what side it is on...
I had two different sets of set 20 bearings leak after a few hundred miles. I started putting RTV around the outside of the bearing seal before installing. Haven't had any leaks since. Just make sure the seal edge and the housing or clean and oil free.
Thanks for the write up. I was planning on doing something similar but I am adding a marine radio that fits in a round hole in the cubby also. Those controllers are great but they are a pain to mount where the wires will be hidden. Great job!
I have for sale:
1. 6 turn steering box ported for ram assist. Box is tight and no leaks when
pulled about 3 months ago. Asking $300. SOLD!
2. Warn 9000# winch mounted in receiver cradle. $500 with out cradle or 550
with cradle. Works great but cable has a few flat spots.
3. Aluminum...
If you have to ruin the pully getting it off I have some extras. Just let me know and I will send you one. They are just taking up room on my parts shelves.
The procedure you describe is how I do it but instead of using a com a long I use a medium to large size turnbuckle with some small chain. You can be more precise when lining up your body with the frame and it is more compact and easier to operate. Some times that one more click on a come a long...
I did read your post. Just letting you know that a cracked frame where the steering box bolts up can cause steering problems and also BUCKWILD was referring to the 8" of wheel travel that you mentioned not your lift.
Check the frame where the steering box bolts up for cracks. My frame was crushed in and cracked. I had to do a major repair where the steering box bolts to the frame and I added a gusset from the crossmember to the frame.
I have a similar set up in my trail rig. 5.0, Mustang EFI, 2 speed atlas, 5.13 gears and 37's but a 4R70W. It pulls hills in overdrive with no problems and is not screaming at high way speeds. I swapped from 4.56 to 5.13 gears and have no regrets.
Put everything you want to sell in the classified section on this site with a price and location. As said you may have someone local need all or some of it. You have quite a few dollars worth of parts that you have listed. Any and all parts that someone is willing to sell to help keep our...
Do a google search and type in [ steering column wiring harness classic broncos]. It will bring up a bunch of post from this site, some will have diagrams with the info you need.
BC Broncos
Jason has helped me out several times. He gave me his cell number when I was having trouble with my 4R70W/Atlas cross member. Never any problems with BC Broncos. In fact I have never had a problem with any of the vendors and I have bought from most of them and spent several thousand...