• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. S

    Smittybilt roll bar B pillar foot plate dimensions and hole spacing

    Was wondering if anyone has these. I’m upgrading to a full cage and going to try to tie my B pillar tubes into my old smittybilt. Unfortunately I no longer have the roll bar to measure myself and the previous owner drilled some extra holes in my floor in that area. The plates I’m looking for are...
  2. S

    Pics of underside hood brace for clearance

    Would appreciate some pics/ideas of how people have modified the underside brace/s for clearance. Not interested in an aftermarket fiberglass hood (have one currently that I want to replace) or hood scoops. I added some pics of how Shannon’s broncos modifies theirs for coyote engine clearance...
  3. S

    Help Identifying these flares

    Can anyone identify these flares just from this single pic? They have small indentations on the edge for fastener placement/spacing that I believe WH Gorilla warflares don’t have but I could be wrong. Guy selling them says that they are flexible plastic material. TIA
  4. S

    Stock track bar frame bracket mounting width?

    Searched but nothing came up that listed the inside mounting width. Anyone have one they can measure for me? I know the 66-75 and 76-77 were different brackets but I believe they both have the same mounting width for the track bar. Thanks in advance. Below is a pic I found online of the stock...
  5. S

    Extended length I/2”-20 T Bolts for disc brake conversion

    Searched here and online with no luck. There are multiple companies that sell extended length 3/8”-24 T-bolts but no 1/2”-20. Anyone have a source/part number/etc? Thanks in advance.
  6. S

    CA ISO Boxwood Green Sheet Metal

    Long time lurker, don’t post much. Finally getting to the body on my 70 original paint boxwood green U15. Hate to be that guy but what’s the harm in asking (besides shame). Ideally looking for original paint boxwood green but will consider everything including new paint/re-paint boxwood green...
  7. S

    Stainless Axle Breather Vent Bolt

    Did some searching for this but couldn’t find one. Anyone have a link to one? Backstory: I have removed the 7/16-20 threaded axle vent breather bolt from quite a few D44’s and 9” axle housings and most of them were corroded/rusted on the inside of the tube to the point of falling apart. I...
  8. S

    Stock passenger EB seat latch mod

    Wanted to share a mod that took me down a very long rabbit hole but maybe it’ll help someone out that is interested in doing something similar. This forum has greatly helped me out and saved me hundreds of hours with countless mods so trying to pay it forward. My apologies in advance for this...
  9. S

    Mustang headrest question

    Nearing the end of a long project of redoing some stock EB seats. I read every thread on here that I could find on adding mustang (and/or other ford single post headrest vehicles) using the 69 mustang/cougar brackets. I wanted to use the 69 mustang headrests but even after relocating my...
  10. S

    1966-1968 (maybe 69) Stock passenger seat

    Question for the gurus out there. I’m looking for a pics of a stock EB passenger seat withOUT the footman loop latch that was added around 69/70? Specifically I’d like to know if these seats had a locking mechanism from the top/back/lumbar portion of the seat to the bottom/seat/butt portion...
  11. S

    Clean stock-ish appearing Explorer overdrive switch/button/light dash options

    I've searched the site but didn't come up with many results. I did check out the keepitclean.com led light button that 71 CA Bronco used in this thread https://classicbroncos.com/forums/threads/efi-guys-harness-to-overdrive-momentary-switch.301083/ but I was hoping to find something smaller...
  12. S

    Stock rear upper shock mount questions

    I tried searching and looking at vendor pics but still not totally clear. The pic is of my stock rear upper shock mount. Is there an old shock inner bushing steel sleeve on my stock rear upper mount that is rusted/frozen in place from corrosion which is holding the inner washer in the pic or...
  13. S

    CA Boxwood green spare tire carrier

    I’m looking for a boxwood green spare tire carrier. I’d prefer an original paint one, to match the rest of my bronco but I’d consider one that has been repainted as long as it has some wear/patina to it. (Yep, just used the p word). I’m interested in buying one outright or I have a couple other...
  14. S

    Adapting 69 mustang seats for an EB

    I picked up a set of newly recovered 69 mustang seats for a great deal. I answered a lot of my questions I had about adapting these to install in my 70 EB by reading threads here but still have a couple more questions. 1. I’ve read on many different threads that the EB uses 2 driver side...
  15. S

    CA Stock EB seat front passenger side rear riser brackets

    Wanted to see if anyone has a set of these so I can weld them on a 69 mustang seat. Maybe you have an old passenger seat frame laying around that’s going to the scrap bin that you could cut these brackets off? Here’s a pic of the brackets that I’m talking about.
  16. S

    SOLD ZF trans, flywheel, clutch, slave, starter, etc

    I was originally planning on swapping in a ZF5 but changed my mind and am going with an auto. I got these parts a couple years ago from another member. They have just sat covered in my garage since. The ZF was rebuilt by a professional trans shop before it was installed in the PO’s EB. PO has no...
  17. S

    D44 Ox Locker Compatibility Question

    I have an opportunity to buy a used D44 ox locker that came out of a 74 Plymouth Trailduster at a great price. Bonus is that it comes with a 4.56 ring and pinion which is exactly what I want and need. My question is: will this set-up fit/swap directly into my early bronco Dana 44 with no issues...
  18. S

    How to bore/drill/cut holes in aluminum hubcaps to fit front wheel lockouts?

    I picked up a set of the dog dish aluminum hubcaps. What is the best way to drill out the fronts so the wheel lockouts fit through them. I’m doing this on a budget so I’d appreciate suggestions for the most reasonable but still professional (centered hole, round hole, clean edges, etc) way to...
  19. S

    Explorer 4R70W Questions

    Awhile back I purchased a 1996 5.0 explorer AWD donor with 250+ miles. Recently I found a super cheap much lower mile 1999 5.0 explorer with a RWD 4R70W with the improved internals. I’m going to bolt either a NP205 or atlas II directly to the AWD tail housing from the 96 explorer. 1. To...
  20. S

    EB D44 question

    Is there anyway to tell ONLY by the EB factory Dana 44 housing if it originally came from 71.5-75 vs 76-77? I have one that's completely stripped of everything that I'm trying to figure out. I know that the upper frame track bar mount is a different size bolt but I thought I read somewhere that...
Top