• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    NV-3500 needle bearings ? Where to buy ?

    Rebuilding the NV-3500 the plastic cage for the second gear needle bearing is melted I Can’t find em anywhere .
  2. R

    Where to get rattle can touch up factory color ?

    Going to try removing the two layers of paint on top of the factory paint Factory is 1974 Village Green Has dark forest green on top of that and beige on top of the dark green I’m going to try going back to the factory paint and patina Will need some touch up paint though for my rust repairs
  3. R

    Tube for sliding inside frame ends ?

    Anyone know what size square tube I need for sliding inside the end of a frame ? Mine frame horns are bent a little from an accident years ago and I’d like to streighten them while I have the rig apart .
  4. R

    GA Hard top wanted , north Georgia

    Looking for a hard top Im In north Georgia but I might be able to have a friend who travels regularly pick up one near Lima Ohio or Philadelphia PA or Amarillo TX since he goes to those places frequently and comes home with an Empty trailer
  5. R

    Any vendor sell bottom fender patch panels ?

    Does any vendor sell patch panels for the bottoms of the fenders in front and back of the doors ?
  6. R

    roll bar in bronco on green BFG poster?

    Anyone know if the roll bar in the BFG bronco poster was a commercial for sale item? or was it custom made?
  7. R

    Best method for removing old Hurculiner?

    its not on my hootus, its on the floor of my Bronco. as I mentioned in this thread https://classicbroncos.com/forums/threads/anyone-ever-see-door-post-repairs-like-this.326233/#post-3576229 Im leaping into the abyss of door post and rocker panel and floor replacement. and removing the...
  8. R

    Anyone ever see door post repairs like this ?

    Ha Sturdiest door hinge post repair ever And the striker post with the bolt welded in the corner is classic I knew when I bought this rig many years ago it had quite a bit of bondo But since I’d never owned a bronco before I never noticed the door posts were flat and didn’t have the little...
  9. R

    Need a bunch of body parts, where to get?

    Alright, we dove in and are gonna be repairing the rust, I need front and rear door posts, rockers, kick panels, floor panels etc. who has the best quality? prices? shipping? etc Im in Atlanta Georgia for the shipping. seems like Toms has the largest selection,, some of the places have some...
  10. R

    need some sheetmetal, all vendors the same ?

    Need to get some sheetmetal, both front door posts , kickpanels, floors and rockers. do all the vendors use the same manufacturer? and if anyone has tips on how to do this and get it put back together square . . . . my door have been replaced years ago by the previous owner, very poorly with...
  11. R

    Anyone know if the dashpad will fit with the Toms plate cage ?

    anyone know if the stock dashpad will fit with the toms plate cage ? https://tomsoffroad.com/products/66-77-ford-bronco-interior-bar-front-cage-with-plates/
  12. R

    windshield frame and hinge replaement

    Im sure this has been covered before but I cant find a good how to. mine is rusty at the bottom, i have a good used frame to replace mine im sure someones posted a how to thread on this but I cant find it.
  13. R

    So who has a new Bronco in west Georgia?

    This yellow four door one was spotted in west GA today. Parked at exit 5 on I-20 Prototype ? Are they shipping yet ? Seems I can’t post pics now ? Weird Pretty sure they hit my card for the fee recently.
  14. R

    74 steering column assembly diagram?

    edit; the T bolts hold it all together? didnt notice that when i took it apart putting my 74 steering column back together after replacing the bearings, and evidently ive already forgotten how it came apart. trying to figure out how the stuff at the top goes back on. bearings snap ring...
  15. R

    easiest way to remove tubes inside frame at steering box?

    im reinforcing the frame under the steering box, while red head is rebuilding the box. im also replacing the upper and lower bearings in the collumn and the pitman arm, I have purchased the inside and outside the frame plates, i could see the box flexing on the frame while someone was...
  16. R

    anyone in Moab 3-19/20 ?

    anyone in Moab this weekend? my son is passing through tonight/tomorrow, has a day to kill, and was looking for a quick ride.
  17. R

    info for EFI ?

    I know this has been covered before , but im evidently terrible at searching. I have an acquaintance thats looking to install an efi 5.0 in his 49 Ford pickup, I suggested a pre 2002 2wd explorer, since he could use the engine trans and rear axle, but some one else that he talked to said that...
  18. R

    Caffeine & Octane Atlanta Dec 6 Bronco day

    https://www.caffeineandoctane.com/ Dec 6 Sunday is Bronco day Anyone bringing their Bronco ?
  19. R

    What bumper is this ?

  20. R

    Georgia Members YOM license plates now legal up to 1989

    For several years Georgia has allowed you to register and display a Year Of Manufacture plate , an original plate from the year your vehicle was made , up to 1970 A couple of weeks ago it got changed to 1989 So if you’ve been wanting to run an vintage plate on your newer than 70 EB, now you...
Top