• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    Most expensive bronco so far ?

    https://bringatrailer.com/listing/2019-icon-autotype-icon-br-old-school-66/
  2. R

    FSB camper

    Saw this last week Looks to be made to fit the FSB
  3. R

    Which CBer built this ?

    https://rmn.craigslist.org/cto/d/1967-bronco-custom/6338349925.html
  4. R

    Get EB appraised in Atlanta ?

    Looking for an experienced appraiser in Atlanta to appraise my EB and 76 K-10 Thanks
  5. R

    thread with body measurements?

    where is the thread with the body measurements? a neighbor of mine is looking to put his EB back together. he also has a 72 F-250 on 38s , a K-5 , and a CJ
  6. R

    So which one of y'all built this ?

    https://atlanta.craigslist.org/nat/cto/5920245446.html Sent from my iPhone using Tapatalk
  7. R

    Saw 3 Broncos in Smyrna GA today

    Saw three Broncos on hwy 41 in front of Cumberland mall today One topless with a stick of wood prolong the windshield up Anyone on here ? Sent from my iPhone using Tapatalk
  8. R

    Any Broncos in the Baja 1000(855)race ?

    Any EBa in the Baja 1000 this year ? Sent from my iPhone using Tapatalk
  9. R

    How to get oil in 66 axle ?

    So the replacement nine inch chunk I bought is from a 66 Anyway. It doesn't have the fill port Yall put it in thru the vent tube ? And how much exactly ? Since with the rest of em the fill port is the way you know it has the proper amount
  10. R

    Sealant for nine inch diff?

    What sealer do y'all recommend for the nine inch diff ? Or just use the gasket ? Sent from my iPhone using Tapatalk
  11. R

    9 inch rebuild help in Atlanta

    gasket blew, didnt realize lost all the oil in the rear diff on a trip, about 1/2 mile from home I hear all kinds of squeaking and clanking, managed to idle it back to my house in 4 Low first gear, anything above walking speed locked up the axle. rear axle gears are toast, pinion gear...
  12. R

    GA need 9 inch center 4.11 ratio

    looking for good used 4.11 9 inch center chunk
  13. R

    GA Chrome bumpers GA

    Looking for a set of chrome bumpers in GA or NE fla Sent from my iPhone using Tapatalk
  14. R

    EB with 08 Exlporer interior and chassis

    http://www.southernoffroad.net/garage.html
  15. R

    Switch IAC on and off ?

    I have the efi from a 90 mustang on my eb Currently have the IAC unplugged because I can't stand the hanging idle When you take your foot off the gas it's about two seconds before the rpm drops Anyone know which of the three wires on the iac i need to run thru a switch ? Or should I just...
  16. R

    Relays ?

    How are yall mounting your relays ? Is there a box or a way to hold the generic relay cubes ?
  17. R

    Pulling engine and Trans together or separate ?

    Going to swap the engine and Trans Easier to pull them together or drop the Trans out the bottom first ?
  18. R

    which gasket set for 1996 351W ?

    looking to order a gasket set for my 96 351W not gonna change the head gaskets, but figured Id changes the rear main and gotta change the valve covers to keep the mustang 5.0 covers probably going to install a new water pump too before the engine goes in thought it would be cheaper to get the...
  19. R

    groove in head at exhaust flange

    ok, so I pulled the exhaust manifolds off my 351W and theres a small groove in the surface where the gasket sits, between one of the ports and one of the bolts that hold the manifold on. any idea how to get this to seal up when I bolt the EB manifolds on? hammer in some copper wire? some type...
  20. R

    Mustang EFI on 351W ??

    Alright, I've read as much info as I can find regarding this But I'm still confused My EB currently has a 1990 5.0 from a mustang (installed in 1999 by me ). That now has a burnt valve and lots of blow by I picked up a 351W , one owner with 95K miles , heard it run before I pulled it ...
Top