• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    OH Tuffy 8 inch Stereo Console with BT Radio

    Please see the pictures. Included is a Pioneer Bluetooth radio already installed. The radio is a little over year old. Pioneer Model DEH-X6600BT, remote an operators manual included. The console is missing the cushion from the top cover and the strap off each side. I robbed the missing pieces to...
  2. JWMcCrary

    Using 2 12V air compressors with 1 tank

    Curious if it will work without causing any issues for the ARB compressor. I have run this compressor since 2007 without fail, works great just slow filling tires. I added a 2 gallon tank to it couple years ago which helps for the first tire, after that it's about the same as it was. I was...
  3. JWMcCrary

    OH 15x10 black steel wheels, need 3

    Looking for 3 wheels to match my spare, or at least close to match. The wheel I have is black, 15x10 with 3.625 backspacing. I believe it's a rockcrawler brand wheel. It looks just like the wheels on the bronco in the pic, except I think those are 15x8.
  4. JWMcCrary

    Mounting points for Duff Tourque Tamer

    I bent mine pretty good at OCBR, this is the 2nd time it's happened since I added lower gearing and it get's into the driveshaft at the yoke on the back of the Tcase. Seems like it's angled in at the shackle end which is causing it to twist. I'm debating moving the mounting tabs on the torque...
  5. JWMcCrary

    76-77 front brake pads - rattling??

    I've been hearing something in the front end that I can't find. Only notice when moving slow and stops when I hit the brake, but the rig stops too. I'm starting to think it's the brake pads. I just recently switched from the chevy disc conversion to stock ford brakes. I don't remember there...
  6. JWMcCrary

    Holley Terminator - Adding Oil Pressure Sensor

    I added an oil pressure sensor to my setup a few weeks back and thought I would post it for others that may want it as well. It is not a necessary item as it offers nothing to the system other than a digital reading of your oil pressure. The handheld and the 3.5 LCD both have fields to show oil...
  7. JWMcCrary

    Question for Holley Terminator users

    I'm using a Holley fuel pressure regulator that has the manifold vacuum connection. On my initial install I had this hooked up but was having some problems that later turned out to be fuel tank vent related. In the process of troubleshooting I plugged off the vacuum port and have left it that...
  8. JWMcCrary

    What's wrong with this picture?

    Mistakes happen but it sure is frustrating when you find them on a Saturday. New out of the box Yukon hardcore hubs. The screws don't even reach through the bezel/selector. There are supposed to be 3 sets of spacers with different thickness for a D44, mine only has 1 set and naturally it's too...
  9. JWMcCrary

    Dana 44 hubs for RCV axles

    I know most are running slugs and that's probably the best. From what I've read the Yukon hubs are probably the best lockouts. When I upgraded to the RCVs I bought the pieces to convert my Warn premium hubs. My question is how prone are the Warn premiums to breaking? Has anybody broken one with...
  10. JWMcCrary

    OH MSD TFI Distributor setup for Holley Terminator EFI

    Price includes shipping within the 48 states. I would like to sell it all as a kit. If it doesn't sell will then consider selling pieces. It's all new and has never been run. I did install on my bronco but before I had a chance to load the Holley software on my laptop to set it up I changed my...
  11. JWMcCrary

    Help with fixing a leak - D20/Cold Duck

    Both cases were leaking pretty bad. Just had them out and resealed and all of that seems fine. This little leak is nothing compared to how it was so I can live with it if I have to. The remaining leak is coming from the unused shift rail hole on the back side of the cold duck. Looks like it was...
  12. JWMcCrary

    Adjustible Detent kit

    How do you know how tight to set? Put these in resealed case because I had them. Case was not popping out of gear, but changed all the gears to tera low and replaced all the gaskets, seals , etc. Did not replace the input and output bearings so none of those specs have changed. Wondering if I...
  13. JWMcCrary

    RCI Fuel Cell - for NYLES

    Tried emailing you (Nyles) pics but it keeps bouncing back. The tank I'm using came from Liquid Iron Industries. They take the RCI tank and add walbro pickups in the center on each side with the outlet coming out of the bottom center of the tank. You can choose that as an option when you order...
  14. JWMcCrary

    OH D44 Knuckles - drilled for heim steering

    The old style drum brake knuckles, 6 bolt pattern, they have moog ball joints in them but will likely need replaced from the abuse getting the knuckles off. If somebody wants them I can press the old ball joints out if you wish. These have been drilled 3/4" to accept heim steering, bronco they...
  15. JWMcCrary

    SOLD Chevy front disc conversion parts D44/D30

    Price includes shipping within lower US. Parts are in Canton, Ohio. I will add some pictures when I get a chance. Chevy HD backing plates (6 bolt pattern) Chevy spindles (6 bolt pattern) Calipers including brake pads with very little wear Steel braided brake lines The spindles have WH extreme...
  16. JWMcCrary

    Replacing wheel stud on spacer

    I need to replace a stud in one of my spacers (1.25"). It's still on the Bronco right now, other than the obvious difference in length would it be the same as a regular stud? Was going to try and pick one up this afternoon and change this weekend.
  17. JWMcCrary

    Ford 76-77 front disc brake install

    Can somebody post a picture of the caliper and pads installed? I'm switching from a chevy conversion to ford brakes and need to make sure I get the hangers on there and oriented correctly...or will it only go one way? Been a long while since I worked on stock brakes and looking at everything...
  18. JWMcCrary

    Single plane vs dual plane with TBI

    Single plane manifolds have a higher RPM operating range than dual plane, so using a dual plane always made sense for rock crawling since "most" people are light on the throttle and want torque at low RPM, plus you want to line up with your camshaft. Was reading on Holley's forum that a lot of...
  19. JWMcCrary

    OH Wanted: 289/302 timing cover

    Need a timing cover to use on a display, doesn't have to be good, one where the timing gear has eaten into the inside would be perfect if laying around. I do need it to have the mechanical fuel pump mount. If you have something that you can sell and ship super cheap PM me. Thanks in advance.
  20. JWMcCrary

    Finish up to hit the trails in 2016....going to try and make it happen

    Well, the thread linked below (after the first original) rolled off into the archives http://classicbroncos.com/forums/showthread.php?t=201487 This Bronco hasn't been touched since summer of 2012. I brought my green 73 to Ohio and have done some upgrades and just haven't taken time to work on...
Top