• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. JWMcCrary

    What is good AFR setting/reading ??

    Everything I've read says it should be somewhere 13.5 to 14.5. The target AFR on my setup is currently 13.5 and it runs right around that at idle, throttle it and goes down low 12's but will climb back up. Runs very good. The reason I ask is the system is showing yellow, which is caution for...
  2. JWMcCrary

    Green Slime, I hope it works

    Right front has been going flat since the wheeling trip (November), takes it about a week to leak out. I put about 2/3 bottle of slime in it today and aired it up to 20 psi and run it around a little. First time I have tried this stuff, will follow up on whether it works for me.
  3. JWMcCrary

    Southington Offroad Park - Day trip, Nov 2

    I was the only EB there, saw 2 full size but only briefly. A guy I work with went also, he has a 2009 Rubicon with lift and 35's and has the factory lockers. 2 more guys from work also came along giving us a group of 4 with 2 rigs. This trip has made me appreciate our Bronco brotherhood even...
  4. JWMcCrary

    O2 bung thread size?

    I need to plug the hole until I finish my EFI swap. I can't find anything that will fit. I read somewhere that a certain spark plug had the same thread, would anybody know that plug part number or what that plug fits?
  5. JWMcCrary

    Holley Terminator EFI - Install (Update 6-7-18)

    This will be a slow process but I haven't seen any other threads on it so I thought I would describe my install, problems and solutions, as I go along. Talked to some people at Summit Racing on Sunday when selecting a fuel delivery system and also to a highly reputable Hot Rod and 4x4 shop in...
  6. JWMcCrary

    Exhaust - shorty headers and 2 in with 1 out

    I want to completely redo my exhaust, I'm tired of what I have, too loud and in the way of too many things underneath. I bent the drivers side on this trip at OCBR. I'm pulling it all off from the headers back. So, for headers I'm looking at recommendations because they seem expensive. Looking...
  7. JWMcCrary

    I give up.......I can't win

    Loaded up to go have a windshield put in tomorrow morning and have the exhaust tweaked to get my anti wrap bar back on, thought that was it, I would be done. Everything I touch extends into something else. Noticed my rock lights were not working, figured easy fix, probably fuse or broke wire...
  8. JWMcCrary

    Is this too short ?

    I already know the answer and crap this will make the 3rd time to get it right. It has about 1.5 inches before the splines start showing. I don't have any way of flexing to check it and I suppose there is no way to know whether I can get away with otherwise. Educated guess, what do you think?
  9. JWMcCrary

    Identify the donor for this alternator

    Only pictures I have that I can find right now. I got this from RRRAAAYYY2 who used to be on here regularly but I see now hasn't been here in 2 years. 3G, 160 amp. I need to find another one and curious what to ask for at the parts store, first thing they want to know is what vehicle it's for...
  10. JWMcCrary

    Modifying the Duff Torque Tamer

    I need to relocate the crossmember for the torque tamer about 3 to 4 inches farther back on the frame. The attachments to the axle are fixed and the adjustment is not going to allow the shackle part to reach after I move it. I think the torque tamer bar would still clear but is close for...
  11. JWMcCrary

    Drive shaft measuring and travel help

    Had my driveshafts done at a very reputable shop but have some issues, before I go back I think one will work and wanted to quiz you guys. I measured from yoke face to yoke face Rear is 27.25 inches Front is 29.5 inches I took in 3 driveshafts, 1 stock rear and 2 stock fronts. All yokes are...
  12. JWMcCrary

    Hydroboost + ram assist with single return

    Been running like this for 4 years and works fine unless you are hard on the brake and idling, doesn't want to turn. All you have to do is bump the throttle or let off the brake and it turns. I'm used to it but thought if a dual return pump, getting rid of the "T" would help that I might swap...
  13. JWMcCrary

    Gasket between D20 and adapter

    IS this prone to leak? I have a gasket and was wondering about silicone sealer. Seems it would be better to just use the gasket with a dot of silicone to hold in place rather than gooping it up and risk it getting into the trans. Will the gasket alone be good enough?
  14. JWMcCrary

    Extreme Duty coil cups used with WH track bar riser

    What I am finding is that it won't fit. Wish I had known that but never thought to ask. Drivers side is OK but the passenger side, the width of the riser takes room needed for the coil cup. The cup can be modified (will need to take to a machine shop) and made work but the slack gained over the...
  15. JWMcCrary

    This summer's "To Do" list (Pre OCBR)

    Figured I could use this as a way for me to keep track of things as well as share my progress. I had said I wasn't doing anything to this Bronco until we got Bradlee's driveable again but the plans are just not falling in place in that order. Hoping that one can be a winter time project to work...
  16. JWMcCrary

    WAH installed with axle riser for track bar - DONE

    Noticed tonight that my WH track bar riser interferes with the measurements in the instructions for BC's Wristed axle housing. I have to modify the WH riser or change it out to something else that doesn't extend towards the center of the axle housing as far. What have others done? I have good...
  17. JWMcCrary

    SOLD Duff prerunner winch bumper

    This is a $500 bumper. I've had it on my 73 for several years and all it needs is paint. I still like it but want something that gives more ground/approach clearance in front of the tires. I looked at modifying this bumper but decided not to. It is still on the Bronco but will be coming off the...
  18. JWMcCrary

    Wheel seals for trailer axle

    Is this a standard trailer axle that somebody can give me a part# for the wheel seal? or tell me what to ask for at the parts house? I was hoping to be able to get the seals before tearing it down and then finding them. I am about to pull this thing from MS to Akron Ohio in a couple weeks...
  19. JWMcCrary

    My 1st Christmas present this year

    The admin in our office gave me a coffee cup with my Bronco on it. I just think it's cool she took the time to consult with a coworker to find a picture and do this. I'm feeling a very Merry Christmas this year.
  20. JWMcCrary

    Need Parts list for EFI - 302 & 395

    No hurry to do the swap, still other things to do but I would like to start rounding up parts as I can to switch 2 Broncos from carb to EFI 73 Bronco, stroked 351W(395) C4 Auto Keith Black KB115 two eyebrow flattop pistons Xtreme 4x4 X4262H Hydraulic Flat Tappet Camshaft Lift: .493''/.512''...
Top